Anti-scale washing machine

To prolong the life of the washing machine will help timely maintenance of equipment and constant care for it. Since in most cases the water entering the machine from the water supply network is characterized by increased stiffness, and too aggressive components are included in the detergents used for washing, the likelihood of scale formation on the “inside” of the washing machine increases.

Plaque that appears on the heater, drum and other elements of the machine will ultimately lead to equipment failure. We will figure out how to protect the washing machine from scale as efficiently, safely and as possible.

What is the danger of scale?

Third-party particles deposited on the elements of the washing machine, over time, form a dense layer that is difficult to remove. Limescale is an insoluble precipitate that forms on the inside of a machine that significantly reduces the life of the equipment. In most cases, the localization of plaque becomes the surface of the heater.

The scale that has appeared on the heating element will certainly lead to increased energy consumption, since the heat transfer of the heating element will be significantly reduced. In addition, the insoluble layer on the tubular heater will contribute to internal overheating of the part, which, after a while, will cause the element to break.

To prevent scale formation, it is enough to process the internal parts of the machine with special solutions containing acids and other aggressive components 2-3 times a year. Such a measure will prevent the accumulation of foreign particles on the "insides" of the device.

It is important to remember that acid formulations cannot be used for washers equipped with enamelled tanks.

An event that provides prevention from the appearance of scale, which helps prevent the accumulation of plaque, is considered to be softening of the water entering the washing machine. The market is replete with various options for filter elements installed on the communications at the entrance to the apartment, or immediately in front of the machine's water intake hose.

If, having examined the “home helper”, you see an already formed sedimentary layer, you will have to use specialized means to combat it. Thanks to advertising, many housewives have programmed in their heads the statement that the “irreplaceable” Kalgon will cope with scum best. However, this tool does not remove plaque, but only prevents its occurrence, provides protection for parts. To combat old education, it is better to use stronger formulations, for example:

• MisterDEZ "Deep Cleaning";
• Scale No;
• Beckmann.

Use household chemicals for this purpose should be very careful. It is advisable to carry out all manipulations with waterproof gloves. Before starting work with the compounds, it is worthwhile to carefully study the instructions and strictly follow the given rules and dosages of the product.

Can I clean with citric acid?

If the washing equipment was operated for a long period of time without the necessary maintenance, and the water entering the system did not soften, then with a probability of 99% the internal elements of the machine have already managed to become covered with a dense layer of scale. Previously, citric acid was considered a traditional plaque control agent. Lemon has such a strong effect that it easily removes limescale 5 mm thick or more. However, is it safe to use it?

If the scale layer on the inside of the equipment is very large, then using lemon powder can harm the washing machine. Pieces of plaque flying away from the heater or other affected elements can cause serious harm to the components of the washing machine. Also, large parts of lime can clog the dust filter, clog pipes.Therefore, the masters advise before cleaning equipment with citric acid to remove from the heater body, forcefully remove scale from it and only then proceed to washing the washing machine. The procedure for cleaning equipment with a lemon will be as follows:

• prepare a small rag and 150-200 grams of lemon powder;
• pour a measured amount of acid into an empty drum;
• start the machine by choosing the longest washing program, which involves heating the water to 90 degrees.

At the end of the process, it is necessary to clean the pieces of scale that have accumulated under the cuff of the hatch door and other seals. So, the limescale will be over, and the washing machine will be protected for several months.