All about washing machines

How to replace bearings in a top-loading washing machine

How to replace bearings in a top-loading washing machineReplacing bearings in a vertical position is a rather laborious procedure. Understanding that all the removed components of the unit will need to be put back in place after installing new bearings can make you doubt your strength, but do not get upset ahead of time. You can make the replacement yourself, without resorting to the help of a professional, you just need to carefully read the manual for action.

Get some tools

So, you still decided on an independent repair of the washer. Before proceeding with the disassembly of the machine, make sure that all the tools necessary for the work are available. During the repair process you will need:

  • screwdrivers of two types: Phillips and flat;
  • screwdriver;
  • open-end wrenches of various sizes;
  • set of hexagons;
  • metal rod.

washing machine disassembly toolsIn addition to tools, you will need new parts that will be installed in place of the failed ones. To do this, find out the full name of your top-loading washing machine. The brand of the unit can be found in the instructions for the equipment or from the inscription on the machine body.

The full name of the model will simplify your search for new components.

You can buy bearings either in specialized retail outlets, or by placing an order on the websites of online stores. To replace failed parts you will need to purchase:

  • set of bearings for a specific model of washing machine. For top-loading machines prefabricated caliper sets are provided;
  • oil seals. Selected in accordance with the repaired automatic machine;
  • special grease for oil seals and bearings;
  • WD-40 universal aerosol lubricant (or other liquid with a similar principle of operation).

When all the tools and accessories are ready, you can begin to prepare the washer. To do this, disconnect it, disconnect the intake and drain hoses. It is best to have a smartphone with a good camera on hand, as well as a notebook with a pen. In the process of analyzing equipment, it is better to photograph each stage, take pictures, how parts, wiring and contacts should be located, if necessary, make notes in a notebook. This precaution will help you reassemble the top-loading washing machine correctly and quickly.

Preparing and disassembling the washer

After the machine is disconnected from the power supply and house utilities, you can proceed to disassemble the unit. For work, you need to provide free access to the machine, so it is better to transfer it to a spacious room or garage. So, the algorithm for further actions will be as follows:

  • First of all, you need to remove the right side wall of the case, for this you will have to unfasten three self-tapping screws located on the back. In most vertical bars, the pulley is located on the right side;remove the side wall of the washing machine
  • gently pull the drive belt off the pulley;
  • Using a screwdriver, unscrew the bolt holding the pulley of the CMA drum.unscrew the bolt holding the pulley

The first part of the work is the simplest and usually does not cause difficulties. Take out the pulley of the drum, put it to the side. Now you can proceed to the main stage of the repair process.

Change bearings

After the pulley is removed, it is necessary to remove the grounding of the drum, located near the support. Using a Phillips screwdriver, unscrew the bolts holding the part.remove the grounding of the drum

Now you have to get the old caliper. To do this, you need a pair of screwdrivers and a long metal rod, which will act as a lever. Screwdrivers are inserted into the holes of the support from opposite sides, the rod is placed between them.pull out the old caliper

Which way to turn the caliper? It is necessary to carefully consider the support, the direction of movement of the part with the inscription "Open" should be indicated on it. Pressing the lever with force and turning the screwdrivers several times, you will remove the element from the washing machine body.

For most models of top-loading washing machines, ready-made calipers are available for sale, including both an oil seal and bearings. Therefore, you just need to put a new caliper on the shaft. A kit with a grease is usually supplied with the part, designed to treat the surface of the element before being placed in the washing machine. A lubricant is applied in a dense layer on the stuffing box and drum shaft in the area of ​​its contact with the stuffing box.carefully lubricate the new caliper

It is absolutely necessary to treat the parts with grease, this will provide good moisture resistance of the joint, less exposure of the elements to wear, and guarantee them a long service life.

If there is no lubricant in the kit with the caliper, you can use any lubricant intended for the bearings and seals of the CMA. After the surfaces are finished, carefully screw the caliper back into the housing. To do this, again take two screwdrivers and a rod and rotate the part in a different direction. The caliper must fully enter and stand well in its seat.

Putting the equipment back

The main work is done, it remains only to assemble the vertical back. To return the typewriter to its original form, you need to do the following:

  • put the drum pulley in place;
  • to screw the ground disconnected at the beginning of work;
  • install the fixing nut holding the pulley in place and tighten it well;
  • tension the drive belt;
  • attach the side cover to the housing.

If you see the main signs indicating that the drum bearing is broken, do not rush to invite the master. Having delved into the essence of the upcoming work, it is possible to replace parts using our own resources.

   

Reader Comments

  • Share your opinion - leave a comment

Add a comment

Read also

Error codes for washing machines