All about washing machines

Location of the water outlet for the washing machine

Location of the water outlet for the washing machineMany instead of the usual tee taps choose water sockets for the washing machine. They are more modern, look more aesthetically pleasing, do not interfere with moving the machine close to the wall and allow bringing the inlet hose to the water supply without dangerous bends. But before assessing its merits, it is necessary to correctly determine the place for its placement, to mount it securely, and after that to attach it to the washer. How to do it yourself and without a flood - we will describe in detail in our article.

Where to place this item?

One of the key points when installing a water outlet is its location. An ideal solution would be a complete overhaul of the bathroom with a special place for the fitting. Then you can place a new branch in accordance with existing rules.

  1. Adequate insertion distance. The inlet hose from the washing machine should be free to reach the water outlet, without complicating the connection and operation. If possible, the wiring should be redone to rearrange the machine as close to the pipeline as possible.
  2. The optimum height of the water outlet. Two nuances are taken into account here. Firstly, the height recommended by the plumbers is 77 cm from the final floor. Secondly, the dimensions of the existing washer, especially if it is planned to install a branch immediately behind its body.
  3. Free access to the valve. This is a safety requirement - in case of problems with water intake, leakage and accident, the owner must quickly and easily get to the tap and shut off the water supply to the machine. You can use the overlap of the general water supply, but it is better to act locally.
  4. Reliable fastening. To avoid leaks, you must carefully consider the method of installing a water outlet. Especially if you plan to place it on the wall. In this case, a special type of fitting is selected, and in the absence of opportunities, alternative options are sought.location of communications

The main thing when choosing a modern frame is to think about convenience. There should be no difficulties in installing and using the outlet, it should not interfere or be inaccessible in an emergency. The aesthetic side of the issue will be an important point, so do not forget about the beautiful design, suitable for the interior of the bathroom.

Choose a water outlet

The modern market offers an expanded range of fittings for any price and any type. It is not recommended to act at random, since the parameters of a particular water outlet will greatly affect the installation and operation of the washing machine. Therefore, we first study the proposed options and choose from threaded, crimp, self-locking and press water outlets.

The threaded elements are the most "running", and the name speaks for itself - a threaded connection is provided here. In addition to screw cutting, special requirements are also imposed on the material of manufacture, which must be resistant to temperature extremes. All this gives this type the following advantages:

  • long term of operation;
  • high tightness;
  • impact resistance;
  • lack of need for additional fixtures;
  • simple assembly and disassembly.water sockets may look different

Crimping devices are considered relatively “young” and involve connecting with a collet - a special sleeve with a provided cylindrical chuck. Due to the intermediate layer, complete tightness is guaranteed, and, consequently, durability and reliable fixation on the pipeline. The list of advantages continues:

  • low cost;
  • easy and quick installation;
  • wide range of;
  • collapsible design with the possibility of partial replacement.

Press water sockets are fixed on the water pipe by soldering. The main plus is the lack of many parts that facilitate assembly.But to perform high-quality fixation, special equipment will be required.

A self-locking water socket appeared not so long ago, but it stands out from the rest of the species. The whole secret is in equipping with special rings, one of which has teeth. As soon as the link is clamped with a key, the clutch engages and all the rings “snap”. The device can be disassembled by again clicking on the "tooth" element. Its main advantages are impressive.

  1. Reusable due to collapsibility.
  2. Connection strength and high tightness.
  3. Universal application.
  4. Ease of installation.
  5. Resistance to loads and temperature extremes.
  6. Durability.
  7. Low price.

Important! In addition to the type of product, we pay attention to the manufacturer - the companies Rehau, Valtrex and Viega have proven themselves well.

Fittings differ in manufacturing material. They come in brass, bronze, stainless steel, cast iron, polypropylene and PVC. Each has its own characteristics and advantages, but it is recommended to navigate through the pipeline system and choose a similar one. Devices differ in the number of connected pipes, but for the available hose of the washing machine, one outlet is enough.crimp water outlet

After exploring all the available options, you can correlate the advantages and disadvantages with the existing conditions and opportunities. Consultation of a plumbing service employee will not hurt. It is worth considering the method of the planned fastening, which will be discussed further.

How to fix the water socket?

Before buying and installing it directly, you need to decide on how to attach the water outlet to the wall. There are several options that depend on the strength, thickness and fabrication of the existing wall. So, a new branch is attached.

  1. In the pocket. If the partition is made of concrete or brick, then the best solution would be a recess in the wall to form a pocket of a suitable size. A hole of 4-5 cm will be required, but it is not necessary to completely recess the fitting. Often he is left standing and camouflaged by improvised means.
  2. In recess with gasket. For thin gypsum walls with a thickness of 4-6 cm, another option is suitable. Make the maximum possible hole and install a half-centimeter sawn wood lining into it. The water socket is attached to a piece of wood, which it is advisable to thoroughly treat with anticorrosive impregnation in order to avoid quick decay.
  3. On the lining. If the walls in the bathroom are drywall, then you will need to act completely differently. First, the drywall is placed on a metal or wood frame, then a 3-4 cm laying is fixed on top, and then the socket itself.

The whole structure is hidden behind another sheet of drywall so that the fitting is on the same level with it.

It is important to soberly assess the strength and thickness of existing partitions, as unreliable fixation will quickly lead to breakdown and leaks. It is important to accurately measure the size of the outlet to eliminate unsightly voids and subsequent repair. Then proceed to the direct installation.installation of a water outlet on a mounting plate

We mount a water socket

Installing a water outlet and connecting a washing machine to it is not an easy task, but subject to anyone who wants it. If there is no self-confidence, then we will contact the appropriate service. Otherwise, we prepare the tools and adhere to the following instructions.

  1. We block the water.
  2. We clean the wall and repair, providing a perfectly smooth surface.
  3. We are marking up. Using a pencil and a building level, draw the height of the fittings and their correlation. Remember that water sockets are placed only horizontally and in parallel.
  4. We make reaming to designate a place for fixtures. Self-tapping screws should be at least three, and it is not recommended to use only the provided pair of “antennae” for fastening.
  5. We will wall the walls if it is planned to install the sockets in a hidden way. We make a pocket, grooves and leads for laying pipes.
  6. If necessary, adjust the diameter of the hole on the surface by attaching pipes and fittings. Everything is adjusted to fit the details so that the reflector completely covers the holes.
  7. We cut off the rubber gaskets and glue them on the back of the water outlet.
  8. Install the water outlet.

Attention! When mounting press water outlets by soldering, we monitor the working time with a soldering iron to prevent overheating.

  1. Gently screw all the fasteners.
  2. We evaluate whether the structure is evenly located and, if necessary, tighten the screws on each side.
  3. We close the voids around the "tee", using a thick polyester putty.

When filling, we pay attention to self-tapping screws: tighten the nuts for protection for cutting or immediately remove the grease that has got on the thread.

  1. With a crimp connection, it is necessary to align and fix the device with one hand, and the second to start twisting it against the wall, controlling the immobility of the collet.
  2. We cover the remaining voids without touching the inside of the pipes and strobes. Allowed only to fill the holes made with foam.

After fastening, the easiest thing remains - to connect a washing machine to the water supply. To do this, we hook the machine’s inlet hose to the water outlet and turn the water tap to its previous position. We turn on the fastest mode on the washer and open the tray for detergents. If water has gone and there are no drops at the junction, everything is done correctly.

   

Reader Comments

  • Share your opinion - leave a comment

Add a comment

Read also

Error codes for washing machines