How to turn on the spin on the LG washing machine?

Modern washing machines have an intuitive interface, so the user, having studied the instructions for the technique, will figure out how to run the main washing modes without problems. An interesting situation is observed with the cars of the famous brand: using the program shift knob you cannot separately turn on the spin on the LG washing machine. The programmer can only select the option “Rinse plus spin”. How to activate the spin directly?

Spin Activation Instructions

Launching the spin mode on LG washers is very simple. Turning on the washer, the user should not immediately turn the knob of the programmer to select the appropriate program. In fact, a selector is not needed at all. To activate the spin, you must use only the same-name button on the control panel. The sequence of actions will be as follows:

• press the network button (including equipment);
• wait until the indicators on the control panel light up, and the machine emits a characteristic sound signal;
• press the Spin key several times to set the desired drum revolution speed. At this time, the display will show the approximate process time;
• start the washer into operation by pressing the "Start" button. Wait for the appliance to squeeze out the laundry and remove the water from the tank.

By strictly following the instructions mentioned, you can be sure that the washer will not collect water for rinsing, but will immediately begin to spin. Having chosen the program “Rinse plus Spin” using the selector, be prepared that the device first collects liquid, rinses things and only then proceeds to push-ups. And this promises an extra 10 minutes of operation of the equipment and several tens of liters of water spent.

Some LG washing machine models do not respond to the algorithm described above.

This is not a reason to be upset, you can run separately "Spin" like this:

• turn on the automatic machine, using the selector select the "Rinse and Spin" mode;
• turn off the equipment by pressing the network key. Intelligence will remember the last command given to him;
• turn on the washer again. At this stage, it is important not to touch the handle of the programmer;
• press the Spin key as many times as needed to set the optimal speed;
• start the program by pressing the "Start" key.

A little trick will help the user turn on the spin. If using the described methods it was not possible to start the mode, your “home assistant” probably has a software problem, or a couple of buttons on the control panel do not work. In this case, you should invite a wizard to conduct the diagnosis.

Spin Off

When washing certain types of fabrics, spin is undesirable. Such a restriction may be set by the manufacturer who released the thing. Sometimes you yourself want to carefully and delicately wash a batch of your favorite clothes.

On LG models, you can turn off the spin function in almost every factory washing program.

In general, you can immediately select a mode that does not involve spinning the laundry. If this option does not fit, simply turn the programmer knob to the desired program. Then, using the button on the control panel that regulates the number of revolutions, set "No spin". The washing will take place in the usual way, but at the end of the rinse, the machine will simply drain the remaining water from the tank and notify the completion of the process.