The LG washing machine vibrates violently during spin

Constant "movement" and "jumping" of the washing machine around the room greatly upset users. Persons experiencing this kind of problem understand that strong vibration during spinning does not bode well. Firstly, extraneous noise and strong roar irritate not only family members, but also neighbors. Secondly, the abnormal behavior of the washer clearly indicates a malfunction in the system requiring repair. Let’s figure out how to stop the “shoots” of washing equipment from the place of deployment, where to start acting.

What causes the technique to vibrate?

Often, just bought and delivered LG washing machines vibrate strongly during operation. Increased shaking may occur due to improper installation of equipment. The list of reasons leading to the "jumping" of the new technology:

• it is possible that the transport bolts that were screwed in before the machine was transported from the store were not removed. They are installed to fix the drum. Bolts do not block its rotation completely, but they will definitely interfere with the operation of the washer;

Before starting the AGR, be sure to make sure that all transport bolts are removed, check their nominal number with the user manual.

• If it’s not a matter of fixing bolts, it is likely that serious errors were made during installation. Modern automatic machines love a flat, smooth floor. Shake the washing machine body with your hands, if it "walks" from side to side, adjust the legs, fix the machine in a level position with a special locknut;
• less commonly, SMA shakes due to overly smooth, and therefore slippery, flooring. The solution will be the use of a rubberized rug or special, anti-slip stickers on the legs of the washing machine. The budget option is to use double-sided tape for these purposes.

If there is a strong vibration during the spin cycle at the washing machine, which has been serving you for several years, perhaps the problem lies in the unbalance of the drum. An imbalance occurs when the machine is overloaded, or when things are unevenly distributed in the drum. In this case, the vibration will be one-time, it can be eliminated by straightening things inside the washer (when unbalanced), or by dividing the volume of loaded laundry in two portions (when overloaded). Also, the components that have been tested over the years by the “home assistant” may be damaged and other components, which we will talk about later.

Probable malfunctions

If the installation was done correctly, the machine was not overloaded with linen, and it was certainly not an imbalance, therefore, there was some kind of breakdown. You can detect the problem and deal with it with your own hands, you need to understand where to start the search. Theoretically, anything could happen.

1. The springs holding the washing tank were worn out. Perhaps the elements were originally of poor quality, or failed due to long operation. In such a situation, when the machine is operating, extraneous noise is heard, as well as increased vibration of the case.
2. Damaged shock absorbing devices designed to prevent shaking of the machine.
3. 
4. The counterweight was heavily worn. This is an element located at the bottom of direct driven LG machines. It is a heavy block. If the washer has been functioning properly for several years, and began to vibrate abruptly, the counterweight mountings may have loosened. Damage to the block itself is less likely, however, in some cases, the cause may be cracks on its surface. Therefore, if the machine does not just buzz during the spin cycle, but “jumps” in different directions, feel free to check the concrete block.
5. The drum bearings came into disrepair. These elements play a huge role in the work of the AGR.If at the same time as strong vibrations a characteristic clang is heard from inside the machine, it is better to immediately stop the washing program and not use the appliance until the bearings are replaced.
6. Rarely does the washing machine “tremble” due to a clogged pump. If this issue is not resolved, a blockage can lead to more disastrous consequences.

It is impossible to ignore the disturbing symptoms from the "home assistant". It is necessary to diagnose the equipment as soon as possible, identify the cause of the problem and eliminate it. The use of AlGi automatic machines in conditions of increased vibration threatens to destroy the base components and components, which leads to more expensive repair of equipment.

How to solve a problem?

First of all, analyze whether the washing machine is installed correctly. Washing equipment must be placed on a flat floor, strictly in level.

Using the building level, it is easy to check how smoothly the machine body is placed.

Before using only purchased equipment, make sure that all shipping bolts are removed from the housing. Remove the top cover and back of the device, inspect the dampers and counterweights. Sometimes even on new washers put damaged components. So, there are several ways to eliminate excessive vibration of the machine:

• tighten the springs holding the drum. The procedure is easy to do with your own hands, however, it is better to invite a service department for any work during the warranty period;
• inspect, and if necessary, replace shock absorbers. Over time, the shock absorbing devices wear out and cannot fully fix the CMA tank in a stationary position;
• check the drain pump. Clean it if necessary. It will also be useful to clean the trash filter;
• inspect the counterweight; tighten the loose screws. Repair also belongs to the category of lungs, but if the machine is under warranty, it is better to entrust the work to specialists. Hand-made troubleshooting threatens with the loss of warranty service;
• Observe the limit on the weight of things loaded into the drum. If the instructions specify a value of 5 kg, then the laundry can be put strictly “to” the indicated number. Also, you should correctly fold the products into the drum - not a solid lump, but evenly distributing things on the surface;
• Do not start washing your shirt alone. The insufficient weight of the product will deprive the unit of the necessary weight. The drum of the LG washing machine will spin too quickly and freely, which will ultimately loosen it. A single wash of one item of clothing will not cause harm, but occasionally chasing an "empty" drum is fraught with breakage.

If rusty smudges are found behind the SMA, it is possible with a 90% probability to confirm the need to replace bearings.

In most cases, to cope with the strong vibration of the washing equipment is simple. Complicated repairs await the user in two cases: when the counterweight unit is damaged or bearings fail. However, these works can be carried out independently, having previously studied the algorithm of actions for replacing elements.