The lg washing machine does not wring out - what to do

The LG washing machine does not wring out laundry after washing - people often turn to service center masters with this problem. Why, then, at one point, have to get wet laundry out of the drum?

This issue must be dealt with carefully, because the reasons can be very different from violations of the operating rules to serious damage. Only by understanding the problem, you can build an action plan for troubleshooting.

Common mistakes

What happens to the washing machine when the spin does not work, but the machine performs all other functions (washing, rinsing, draining water). No matter how rude it may sound, the user’s carelessness may be to blame. Here are some common mistakes people make:

• use the wrong mode, for example, in programs such as Wool, Silk, Hand Wash, the spin mode may not be provided at all. As a result, you will take out wet laundry from the drum. You can solve the problem by separately turning on "Spin" after the end of the main program;
• accidentally press the "No spin" button;
• put too many things in the drum, an overload occurs, the machine does not wring. In this situation, things need to be pulled out of the drum of the washing machine and divided into approximately the same load into two loads and squeezed alternately by running the Spin function. If a single down jacket is not wrung out in the drum, then either it is too big for the drum of your car, or it is unevenly knocked to one side. Perhaps to fix the situation will help special balls for washing, put them together with a down jacket and run "Spin";
• too little laundry is washed, which leads to an imbalance, the machine freezes during the spin cycle.
  

  When washing clothes, put several large ones in a drum with small things. For example, socks can be washed with jeans or tights.

• Do not clean the water drain filter. It may form a blockage, which will affect the spinning process.

Damage to the tachometer or engine

From frequent overloading of the washing drum, the sensor responsible for engine speed may break. If it breaks, then the washing machine stops squeezing the laundry. Such a problem is extremely rare, but still it should not be ruled out. It is possible that the problem is not in the sensor, but in the oxidized wires coming from the sensor, or in a loose mount.

Even less often, the spin in the washing machine disappears due to a burned-out electric motor. In cars LG, as a rule, they put an inverter motor, and it is quite reliable, it is not in vain that manufacturers give it a guarantee of 10 years. Replacing the engine in a modern car can cost a pretty penny. Then you can replace the tachometer yourself.

Control Module Issues

The operation of the control module can be checked in diagnostic mode. This mode is not available in all models of washing machines, but if you have one, then try to run it. First plug the machine into the network and wait for the end of the sound signal. Then simultaneously press the two “Spin” and “Temp” buttons.

Having run the diagnostics, press the “Start” button once, as a result the hatch door will be blocked. Press the “Start” button again, the machine will go into spin mode. If the machine does not make a single revolution, then there is a problem, to make sure of this, do the following:

1. provide access to the engine of the washing machine by removing the back panel of the housing;
2. take a tester or multimeter and turn on the AC voltage measurement mode;
3. remove the chip with wires from the engine;
4. measure the voltage between the contacts of the wires, if the device shows 140-150 Volts, then the control module is working. In the absence of voltage, the module will have to "reflash" or change.

Important! Only a specialist can more thoroughly check the operability of the electronic module, so in this situation it is better to seek help. After all, not knowing the nuances, you can exacerbate the problem.

As you can see, there can be many reasons why your washing machine is not wringing. At the same time, we did not consider those cases where the absence of an extraction is associated with the absence of a drain. If you are interested, you will find the details in the article LG washing machine does not drain or squeeze.