All about washing machines

Can I run an empty washing machine?

Is it possible to run an empty washing machineMany are afraid to turn on an empty washing machine, fearing an imbalance of the drum, not burdened by the laid kilos of laundry. But this approach is fundamentally wrong, since, on the contrary, “idle” launches are not only allowed, but also necessary. When is it better to remove things from the tank and in what mode to wash - we will describe in detail below.

First Run Rules

Experts recommend starting the machine idle, at least in two cases: an additional cycle at the end of the wash or the first time the machine starts. If you can still do without cleaning the drum, then it is better not to neglect the “test run”. The explanation is simple - it is necessary to check the equipment and remove the factory grease without risking personal belongings.

In the store, even the most expensive and famous, no one will wash the washing machine before the sale. Therefore, the technical oils and dirt remaining after production and testing will easily stain things loaded into the drum. The first single wash will help to avoid unnecessary trouble. To make the first start as effective as possible, you should adhere to the instructions.

  1. Without loading the laundry, close the door of the hatch of the machine.
  2. Pour detergent into the tray. It can be any powder or gel designed for machine wash and labeled “automatic” on the label. Handwash mixtures are not allowed, as these formulations cause increased foaming. It is also permitted at first to wash with a special cleaner that can quickly and better remove factory grease (we will give specific examples below).

For an empty cycle, half the dosage of detergent is sufficient.

  1. We connect the equipment to electricity directly, without the use of tees and extension cords.
  2. Choose a program. It is advisable to stop for a long time with strong heating of the water, for example, "Cotton 60".it makes sense to launch a new washing machine without laundry

Now you need to check whether the purchased washing machine is working properly. To do this, we do not leave the machine, but observe the washing process. The following signs will indicate normal functioning:

  • The drum spins up gradually, changes the direction of movement, accelerates during the spin cycle and slows down when the water is drained.
  • The water warmed up within 10 minutes after starting the machine (the hatch door should warm significantly).
  • No visible leaks.
  • There are no extraneous knocks and there is no amplified vibration.

If any malfunction is detected in the operation of the machine, you must press the "Start / Cancel" button, disconnect the unit from the power supply and manually drain the water through an emergency drain. Next, we immediately report the problem to the technical support center and await the arrival of the wizard.

Do not forget to prepare a warranty card and accompanying documentation for the machine, so that a specialist conducts diagnostics for free. But a free check is possible only if all the rules of installation and connection to communications are observed, as well as the timely removal of the transportation bolts. The main thing is not to try to fix the problem on your own, as inept experiments will only aggravate the situation.

Means for "single" washing

Particular attention should be paid to detergent. Sometimes residual grease is so difficult to remove that standard powders cannot cope with oil and an unpleasant odor. Then a special technical cleaner, for example, Helfer Start HLR0054, will come to the rescue.

Helfer Start HLR0054 contains strong surfactants that can degrease metal surfaces and clean the drum and internal parts of the washing machine of fuel oil, oil, soot, limescale and much more. Thanks to this, one cycle is enough for excess grease to enter the sewer. The versatility of the product, which allows the use of powder in any model of the machine, is also pleasing.Using it is also simple.Helfer Start HLR0054

  1. Pour the powder into the main compartment of the tray (you do not need to measure the dosage, since one packet is designed for one cycle).
  2. We set the mode of type "Cotton 60".
  3. We start the wash.

No additional cycle required. The main thing is not to rush and do not turn on the mode faster. After completion of the program, you can safely load a batch of linen and not worry about the quality of their washing.

Tips for beginners

The first launch will be trouble-free if you approach it responsibly and patiently. Accuracy will not hurt in the future - knowing a few simple tips, you can not risk your things and extend the life of the washing machine. For example, do not neglect the following recommendations:

  • Always start the laundry without any laundry after the machine is finished to wash off any powder residue from the drum surface.
  • After washing, wipe the case, drum, tray and rubber seals from moisture to prevent mold and rust.after washing, wipe the cuff and drum of the washing machine with a cloth
  • Leave the hatch door and powder receptacle open, ensuring free air flow into the unit.
  • Regularly clean the waste filter and the drainage system as a whole.
  • Do not exceed the permissible dosage of detergents.
  • Choose quality detergents and washing gels.

Carefully check the pockets of the things being loaded into the drum to prevent foreign objects that are hard or sharp from getting into the bank.

Idling is an obligatory step in the operation of the washing machine, which will ensure high-quality cleaning and a long service life. The main thing is not to neglect them and other recommendations for caring for the machine.

   

Reader Comments

  • Share your opinion - leave a comment

Add a comment

Read also

Error codes for washing machines