All about washing machines

How to hide hoses from a washing machine

How to hide hoses from a washing machineIn order for the machine to work properly, the mains and water supply communications must be located correctly so that nothing pinches them and interferes with their functioning. In the article we will tell you how to hide the hoses from the washing machine and at the same time maintain their performance.

Fundamental rules

When planning the installation, first of all, you need to consider that the back wall of the washer has many protrusions. Even if, as it seems to you, you have allocated enough space for the wires, the wires can catch on protruding places and be damaged or compressed. This must not be allowed! Therefore, as a rule, people leave between the back of the car and what stands after it (furniture, wall) about 10 cm. In extreme cases, 5-8 can be dispensed with, but then it will be more difficult to correctly position the hoses.

Important! The drain hose has some installation features. For example, there must be a bend, and the hose itself must be located at a certain height from the floor. Consider this when planning.

If you are faced with the fact that it is impossible to carve out at least 5-8 centimeters for wires and hoses, then installing a washing machine in this place is unlikely to succeed. And if it works out, it won’t work. Reschedule the installation and find a more suitable location for your unit.

Solutions from the Masters

It is difficult to find specific recommendations on the Internet, because usually the masters require you to specify the dimensions of the machine, the parameters of the room and the like in order to approach the issue individually. But we tried to collect some general information that is universal for any device and any room.it is important to properly organize connection points for CM communications

As a rule, people prefer to install a washing machine in the bathroom. In this case, there are several recommendations that are suitable for any device and for any room. For example, some masters advise putting the washing machine with a side wall to the bathroom, and a back wall to the wall so that you can extend the drain hose and the water supply hose under the bath. Thus, there will be enough space for hoses, and they will be hidden from the eyes.

As for the power cord, it is much thinner and takes up less space, so you can literally leave 4-5 centimeters between the back of the machine and the wall. This distance will not be striking, and all communications will be installed correctly!

Some experts propose to close the end of the bathroom, for example, with drywall boxes, where hoses should be hidden. You can still lay the end of the bathroom with a brick or close it with a screen, and in the resulting overlap make holes for hoses. It all depends on what you like best, and what kind of alignment you consider more aesthetic.

In some cases, due to the small dimensions of the apartments or the situation that was not thought out well in advance, the washing machine has to be installed sideways to the wall, that is, the back wall is visible in front of all its unaesthetic structures. In this case, the masters advise you to connect all the hoses and wires to the communications, and then close the back wall with some curtain: matte or the color of the washer. With a competent approach, it will look very decorative, and all wires and taps will be hidden.

Some users prefer to install washers, for example, in the kitchen or in the hallway, where there are no objects such as a bathtub under which you can conveniently hide the hoses. In this case, the masters advise installing the machine with the back to the wall, in which you need to make a hole in advance. Thus, everything will be hidden in the wall and do not have to put the machine at a visible distance from the object behind. Many more craftsmen practice creating some kind of plywood boxes, in which wires and hoses are hidden.This is an interesting way to decorate an unaesthetic design and at the same time put the washer where it is convenient for you.

In any case, it is necessary to proceed first of all from considerations of ease of use, and then - the beauty of the species. However, if there is an opportunity to hide impartial wires and hoses, better do it!

   

Reader Comments

  • Share your opinion - leave a comment

Add a comment

Read also

Error codes for washing machines