Synthetic mode in the washing machine

Judging by the name, this special mode is suitable for cleaning any synthetic and semi-synthetic fabrics. However, this statement is not entirely correct. Today, almost every thing has an admixture of synthetics, but this does not mean that such clothes should be cleaned exclusively when starting the program of the same name. To ensure high quality cleaning of linen, you need to understand how the washing machine functions when choosing the Synthetics mode, what washing parameters are put in this concept by various brands - manufacturers of washers.

Bosch appliances

Not all Bosch automatic machines are equipped with Synthetic mode. A whole series of equipment manufactured before 2007 has in memory a program for washing mixed fabrics, which is recommended to be launched when cleaning synthetic things. Modern SMA brands are equipped with this mode, the main parameters of which are as follows:

• water heating occurs to a temperature of 30-40 ° C;
• the spin speed is not regulated, the user can easily set the required number of revolutions;
• washing duration is also subject to change. You can set the time from 70 to 140 minutes;
• to ensure maximum cleaning quality, it is recommended to load no more than half of the permissible mass into the drum;
• the rinse option is set by default. Optionally, you can start an additional rinse cycle, if such a function is provided by the intellect.
  

Thus, this program in Bosch washing machines is quite flexible, and can be adapted by the hostess for specific washing parameters. When choosing a mode, pay attention to the quality and degree of contamination of things loaded into the drum. The Synthetics icon on almost all Bosch washers is presented as a suspended shirt and is additionally signed. Therefore, difficulties with choosing a program will not arise.

Cars Samsung

Synthetics mode is found on the control panel of almost every automatic brand machine. In the instruction manual you can find a detailed description of the program, as well as a list of products allowed for cleaning with these parameters. For what things would the regime be ideal? The manufacturer allows washing blouses, shirts, shirts and other products made from synthetic fibers. The main washing parameters in the program:

• the water temperature in the tank reaches 60 ° C, however, at the discretion of the user, the heating can be reduced to 40 degrees;
• intelligence pre-wash is not provided;
• the default spin speed is 800 rpm, but the value can be increased up to 1200 rpm, if this is possible in the equipment specifications;
• average water consumption varies from 50 to 62 liters.

To increase the efficiency of cleaning, the manufacturer recommends lumping no more than half of the drum into the machine at a time. So the quality of washing will be perfect.

On the control panel, in most cases, the original designation is not provided, the program name is simply written next to the programmer’s handle - Synthetics.

Siemens washing machines

This brand, by contrast, does not seek to program in intelligence the mode for washing synthetic fabrics. Only a few models have such an icon. For washing machines equipped with the Synthetics program, the washing parameters when it is selected will be as follows:

• unfixed temperature of water heating in the system. The user can set the preferred value: and 30, and 40 and 60 ° C;
• rinsing starts automatically, it is impossible to remove the specified option;
• so that the washing quality does not suffer, it is better not to load more than 2.5 kg (with an acceptable five kg) of synthetics or semi-synthetics;
• the spin speed is adjustable, if necessary, the function can be disabled;
• an additional rinse option is provided, which can be set along with the Synthetics mode;
• the average cycle time is 105 minutes, depending on user parameters, the time may vary.

If you use washing and drying equipment, be prepared for the fact that intensive drying should not be started under the regime. In the absence of this program in the Siemens brand washing machine, you can clean synthetic clothes by choosing the Mixed laundry cycle.

Technique Indesit

In this manufacturer, on the contrary, almost every washing machine has a designation of the mode under discussion. On modern machines there are two variations of the program - Synthetics 1 and Synthetics 2. There is no significant difference between them, however, slight differences can be found.

1. Synthetics 1. Water warms up to a temperature of 60 ° C, it is impossible to start preliminary washing, but it’s really possible to turn on the additional option “Whitening”. Loading, like all manufacturers, is made on a half-drum. The cycle time is 75 minutes. Spin is performed at a drum rotation speed of 800 revolutions.
2. Synthetics 2. A significant difference is the default heating of water to only 40 degrees, as a result of which the program time is also slightly reduced - 71 minutes. Other settings are similar to the first mode.

So, we described in detail the parameters of the Synthetics mode, which vary depending on the brand manufacturer. Before starting the washing process, carefully study the description of the program, load the appropriate things into the drum and proceed with the procedure.