The pump hums, but does not turn (Siemens washing machine)

Question: Good afternoon. SMA Siemens++, when the machine is turned on (when selecting a program on the command device), a voltage of 140 volts is supplied to the pump, it constantly hums but does not turn. at the same time, at the time required by the program, the pump operates in normal mode, i.e. 220 volts are supplied. From somewhere there is an electricity leak to the pump. the module is without burns, the contacts are clean, where should I look for an electrical leak, what should I check?

A representative of the Samrem organization (repair of household appliances in Perm) answers:

As a rule, in such situations, the heating element (heater) or motor is broken. On Bosch and Siemens, this is the main reason. But to speak in detail, you need to indicate the full model and En-r.

1 reader comment

1. 06/05/2016 at 13:09

   Bakhtiyar:

   Hello! Please tell me, in my LG washing machine the filter at the bottom for drainage cannot be unscrewed, that is, it has been unscrewed but without a filter, what should I do?

   Answer