How to disconnect the LG washing machine during washing?

Each program in the washer has its own duration, but sometimes the user can not wait. Just stopping the cycle and opening the door will not work: for safety reasons, the UBL will work. But you can turn off the LG washing machine during washing if you follow certain instructions. It will be discussed in the article.

Quick shutdown

If you suddenly see coins, paper, pins, or other items that are dangerous for clothes and the machine in the washing machine, you can’t do without stopping the cycle. But you can’t just pull the wire out of the socket and quickly open the door - there is a more effective and painless way for the technician to turn off the program. It will only be necessary to press and hold the “Start / Pause” button for a couple of seconds, and as soon as the specified settings are discarded, select the minimum spin, and then start draining.

After emptying the tank, the machine switches off with the corresponding button. It remains to wait a couple of minutes until the UBL is removed on its own and unlocks the door. Now the path to foreign objects is open, you just need to find them among the linen and remove it. But the suspended cycle will have to start all over again.

If the foreign body has fallen into the tank, then it will be in the trash filter located in the lower part behind the technical hatch.

If "cut down" the light

Another thing is if the machine stopped not at the initiative of the user. Often during the washing process, the “general light” is “cut off”, and the machine stops the cycle that has begun. In theory, the unit remembers the stopping point and, when the power is supplied, continues the program from the reference point.

But in reality, not all washing machines can boast of an ideal memory, but they are able to recreate the regime only for a certain time, from 2 to 30 minutes. More often than not, the program crashes due to a power outage. The user only needs to start over - close the hatch and select a mode.

We remove water from the tank

You should not neglect the rules for stopping the program described above. For example, if you forget about emptying the tank and quickly open the door, it is easy to literally arrange a flood. To avoid unpleasant consequences, you must immediately think about a safe and convenient way to remove water from the drum. The surest method is to enable the appropriate program.

There are two options - the "Spin" or "Drain" buttons. The first one lasts no more than 10 minutes, the second one copes in 2-3 minutes, which will not take much time and save you from unnecessary worries. But the "work" method only with the normal functioning of the machine, otherwise you will have to act through the drain filter.

A drain filter or emergency drain is provided for emergency situations when emptying the tank in normal mode for some reason is not possible. Then open the technical hatch in the lower right side of the case and unscrew the round plastic nozzle. Do not forget to wait for the liquid to cool and place a container under the opening or cover the rags.

The machine issued an error code

Sometimes it forces the washing machine to stop popping up during washing error code. This is possible when a sharp power surge occurred in the network, because of which the control board “hung”, and the system slowed down the work for safety reasons. To continue the operation of the machine, you will have to completely cut off the unit from the power supply, wait about 15 minutes and repeat the start.

During a long “respite”, the system will have time to reset the program that was started, and at the same time information about the error. As a rule, such a shutdown helps to restart the machine and continue the scheduled wash without any problems. But there is a likelihood of a real breakdown: then the signal will repeat, and you will have to call the wizard or engage in self-diagnosis.