All about washing machines

Indesit Dishwasher Errors

errors PMM IndesitNot a single dishwasher in the world needs a self-diagnosis system like an Indesit dishwasher. According to statistics from independent service centers, this technique breaks down most often. The problem is aggravated by the fact that in the Indesit lineup there are quite a few cars without displays. How to recognize errors from them? In this publication, we discuss the errors of Indesit dishwashers with and without a display. We will tell you how the codes are decrypted and what to do when the code is decrypted.

How to deal with the code?

Do not underestimate the Indesit dishwasher. Not so bad. In a number of cases, the error code can be eliminated even without disassembling the “home assistant”. Experienced craftsmen recommend restarting the machine up to three times. After that, if the code will be returned, you need to disassemble the technique and conduct its diagnosis, based on the interpretation of error codes. How to reboot?

  1. You need to press the on / off button and holding it a little let it go.
  2. Next, after 10 seconds, turn off the power to the equipment by pulling the plug of the power cord from the outlet.

It is not recommended to power off the dishwasher sharply, especially without disconnecting from the button.

  1. After 20 minutes, plug the power cord into a wall outlet and wait 10 seconds.
  2. Press the on / off button and run the program.

If the error code no longer returns, then we continue to use the machine as before. Well, if the code returned, you need to repeat the reboot two more times. After that, there is no point in rebooting, you need to look for a problem.

Decoding and recommendations

Without delay, we begin to give decryption of error codes. First, we will call the code for Indesit cars with a display, and then for “Indesit” without a display.

AL01, on typewriters with 4 programs - 1 LED, on typewriters with 6 programs - 3 LEDs. A general decryption indicates a sensor that monitors water leaks. It is possible that a leak did occur due to depressurization of the washing chamber, tank, pipes, or maybe the sensor worked for no reason, it happens like that. What to do? It is necessary to penetrate into the pan through the side wall and determine exactly if there is water. If there is no water, then you need to check the sensor, it may require replacement. If there is water, it must be drained and the leak eliminated.

AL02, on machines with 4 programs - 2 bulbs, on equipment with 6 modes - 4. This error can be seen when the system detects the lack of water in the tank. In this case, there may be two culprits: an inlet valve and a control board. The master can test the control board, but you can check the intake valve with a multimeter yourself. If it turns out that the valve is to blame for everything, it must be changed.dishwasher pump Indesit

AL03, on a technique with 4 modes - 1.2 light bulb, with 6 modes - 3.4. The machine needs to drain the waste water, but it cannot do this. The most likely cause is a blockage or defective pump. But there may be a break in the connection between the pump and the control board. There may also be problems with the firmware or even physical damage to the control element. Check the pump and drain hose for blockages. Test the pump with a multimeter, replace if necessary.

AL04, on a dishwasher with 4 modes - 3 LEDs, on appliances with 6 modes - 5. “Four” tells us about problems with the thermistor. You need to check this part and its wiring. If the temperature sensor is broken, change it; if it is the wiring, change it.

AL05, on a typewriter with 4 modes - 1.3 LED, on technology with 6 programs - 3.5. Extremely unpleasant malfunction, indicating a defect in the circulation pump or water level sensor. First of all, we check with a multimeter and blow the pressure switch, then the circulation pump. If the pressure switch does not work, you can change it without problems, but with the circulation pump, you can not cope. If anything, call the wizard!

To remove the circulation pump, you will need to completely remove the Indesit dishwasher pan. For a beginner, this action is almost inaccessible.

AL06, on machines with 4 programs - 2 and 3 LEDs, on a dishwasher with 6 programs - 4 and 5. The operation of the inlet valve does not meet the specified requirements. The problem may be due to a break in the power supply wiring, contact closure, or control board malfunctioning. First of all, we check the wires and contacts. Burnt contacts and broken wires should be replaced. If you find problems with the electronics, call a professional.

AL08, on a dishwasher with 4 modes - 4 LEDs, on a typewriter with 6 programs - 6. Indicates that the Indesit dishwasher thermistor is out of order. The part should be carefully checked with an ohmmeter and possibly replaced.

AL09, on 4 and 6-mode machines - 1-4 LEDs. Indicates problems with the firmware of the control module. It is necessary to entrust this breakdown to the master, who will check the firmware and, if necessary, reset it or even reinstall it.

TEN on the dishwasher IndesitAL10 (F10), 2-4 bulbs flash on 4-mode machines, 4-6 on 6-mode machines. And this code indicates problems with heating the water in the system. Probably, the heater has failed, its wiring or bus on the control board, which is responsible for the heater. You will need to replace the heater, wiring or bus control board. The first and second can be eliminated with your own hands, the master will deal with the tire. More detailed information on the repair of heating elements can be found in the article. Do not heat the water in the dishwasher.

AL99, on machines without a display, this error is not recognized. This error indicates a malfunction of the control unit, a break in the power cord, a defect in the socket or power supply. Our task is to check the outlet, take measurements in the power supply and make sure that everything is normal with the power of the machine. It is necessary to check the electronic module and replace it if it has multiple physical damage.

So, how to fix, and most importantly how to find the cause of the Indesit dishwasher error. First you need to understand the decoding of a specific error and as soon as you succeed, you can roll up your sleeves and take on the search for a defect. Good luck

   

6 reader comments

  1. Gravatar Ivan Ivan:

    The start button does not turn on. When forcibly held, three 888 are displayed, what is it?

    • Gravatar Marker Felt-tip pen:

      Reset Programs

  2. Gravatar Sergey Sergei:

    What is the error F10?

    • Gravatar Anton Anton:

      Most likely - a violation of the TENA circuit or it burned out. Also, the control relay may have broken.

  3. Gravatar Alex Alex:

    What kind of mistake is A 5?

  4. Gravatar Lada Lada:

    What is the error I30?

Add a comment

Read also

Error codes for washing machines