All about washing machines

Error F16 in Ariston's washing machine

F16 CM AristonVertical washing machines Hotpoint Ariston immediately after the start of the washing process can display the fault code F16. In most cases, an error is displayed immediately, even before the program starts. Sometimes, the code may appear already in the process of washing things. We'll figure out what the F16 error testifies to, what kind of damage to the washing machine does it indicate?

Error manifestation

The easiest way to identify an error on modern washing equipment with a display. It is on the digital screen that the system displays the abbreviation F16. If the machine is not equipped with a display, the user will have to carefully observe the behavior of the "home assistant".

Earlier Hotpoint Ariston models with one power indicator on the control panel (we are talking about ATL, AT, TX models) will notify of a malfunction in the system by flashing the light and rotating the program selector. 16 consecutive blinking of the indicator and clicking of the programmer will notify about error F16.

Washers equipped with not only a network button, but also keys for selecting additional functions, notify the user in a slightly different way. For example, on machines of the AVTL series, AVTXL, the “Spin” indicator starts flashing, and with it the “Key” symbol of the door lock.

Ariston Low-End Series vertical machines show an error by flickering the Rinse lamp (located in the column with indicators for the stages of the specified mode). In addition, additional options LEDs may light up.

Where did she come from?

What to do to eliminate the detected error? It is necessary to understand what kind of malfunction in the system this designation signals. Mistake F16 on the washers Ariston with a vertical loading type indicates a problem with the drum parking sensor.

This breakdown code is typical exclusively for “vertical bars”; in automatic machines with front loading, there is no such error.

There are several options, as a result of which the failure occurred:casement drum in Ariston

  • the leafs of the drum are not fully closed. Make sure that you close the shutters tightly, having finished loading things. When they close, a characteristic snap sound should be heard. With a loose closure, the machine will not start to work;
  • poor connection of contacts. Make sure that the wires in the circuit from the parking sensor up to the control unit are connected tightly. Sometimes, due to the vibrations that the washer gives out during operation, the connection density of the contacts is disturbed. The solution will be the restoration of wiring;
  • one-time malfunction of the control module. Perhaps eliminating the code will help turn off the AGR from the mains for 15 minutes. After that, restart the washing equipment and select the desired washing program.

So, fault F16 in washing machine aristonmay appear for several reasons. If quick action did not help, you should take on a full repair. In some cases, you will have to resort to the help of professional masters.

We are trying to repair

Initially, you can try to repair the machine yourself. If re-closing the drum flaps before a characteristic click or restarting the machine does not work, more serious repairs will be required.

To test the functionality of the drum lock sensor, parking device and micro switch, you should "arm" with a multimeter. Using the tester, each of the elements is diagnosed. In case of malfunctions, it is necessary to replace the damaged part with a new one.

It will be very difficult for a layman to correct the situation with a failure of the control unit. If the module tracks burn out, the microcircuit burns out or the main microprocessor is damaged, it is recommended to contact a service center or workshop for the help of specialists.

Error F16 may occur if water gets into the contacts of the parking sensors.

When undertaking repairs on your own, get ready that it may be necessary to solder the burned out circuit tracks, change the elements, the malfunction of which will be detected. If the microprocessor breaks down, the control module will not be subject to recovery, it will have to be completely replaced.

Not the fact that the problems are in the control board. Be sure to inspect the washing machine wiring for damage, disconnected contacts. It is worth checking the wires that extend from the drum parking sensor to the main unit.

The wiring deteriorates over time due to external influences, so the contacts must be checked periodically for tightness of the connection.

In an Ariston washing machine, a wiring defect can lead to more serious consequences. Damaged wires can cause a short circuit, as a result of which the electronic main controller may fail. The wiring can be repaired using twist with heat shrink, however, an ideal option would be a complete replacement of the cable loop. Contacts are restored by soldering or by completely replacing a used contact block.

   

Reader Comments

  • Share your opinion - leave a comment

Add a comment

Read also

Error codes for washing machines