All about washing machines

Error F10 on Ariston washing machine

error F10 on CM AristonA modern washing machine is a complex technical equipment, and as you know, the more complex the device, the higher the likelihood of breakdown. Microprocessor technology, which is used in the control unit of the washing machine, allows you to instantly diagnose the device and display on the display panel a message about which node exactly the error occurred. Now we will analyze the error code F10 on the Ariston machine. With some knowledge, you can find out the reason for the origin of the code and get rid of it.

The nuances of the manifestation of error

The Hotpoint Ariston washing machine simply stops its normal operation, that is, at the end of the water injection, it will crank the drum a little and then drain the water. And all the time on the monitor the inscription F10 lights up. True, sometimes it happens that the system generates an error for no apparent reason. If the device does not have a monitor installed, then the message with the error code F10 on the Ariston model will be displayed as follows.Ariston margherita

  1. For example, in Ariston Margherita, two light indicators are installed - power and opening the hatch. The power indicator will blink 10 times in a row, a series of blinks will be repeated every 5 to 10 seconds. The door alarm lamp will light continuously. The handle of the definition of the washing algorithm will begin to spin clockwise, and make constant clicks.
  2. On washing machines such as AVL, etc., where the indicators for executing the washing algorithm are set, the snooze and quick wash keys will blink, most often the key button will blink.
  3. On the Ariston washing machine, from the Low - End product range, the spin and end indicators of the washing algorithm will flicker. In addition, all keys installed horizontally can light up.
  4. On machines such as Hotpoint-Ariston Aqualtis, the presence of this malfunction will be signaled by temperature indicators for washing at 30 and 50 degrees.

What is this code?

The detection of the F10 code indicates to us that an error occurs in the operation of the water level indicator. What to do when identifying the F10 code? The pointer is installed in the pressure switch. For some reason, it does not generate a real signal about the volume of water injected, that is, the tank is not completely filled, but it is already empty. The presence of a malfunction in the indicator leads to the fact that the washing machine stops working, water starts to drain, and the indication F10 lights up on the monitor.

In other words, the presence of this error indicates serious malfunctions in the pressostat of the machine. But, this will prevent you from eliminating it on your own. The generation of a message indicating the presence of such a failure can occur for a number of reasons.

  1. Malfunctions in the control and display unit. When an error occurs for the first time, you can turn off the machine for 5 -10 seconds, and turn it on again. There was probably a malfunction in the control unit and after rebooting it will disappear. If this situation repeats often, then there is a possibility that the humidity in the room where the unit is mounted is increased.
  2. Error indication may appear if incorrect connecting the drain to the sewer. This is characteristic of the new Ariston brand cars. That is, the drain hose is below the tank level (500 mm) or its length exceeds the recommended size. To prevent this error, the connection must be carried out in strict accordance with the requirements of the operational documentation. But it will be better if the connection is performed by specialists from a service company.
  3. Low water pressure. This may cause this error. If water does not enter the house well, then to solve this issue it is necessary to check the status of the input tap. If even a fully open crane does not solve this problem, then you should contact the management company.

    By the way, a low pressure can occur due to the fact that the input filter is clogged with garbage.To fix this defect, clean the filter.

  4. The contacts in the pressure switch circuit are broken. That is, you need to do it yourself to check all the contacts on the way from the sensor to the control unit and clean them if necessary.

Check the level sensor

Pressostat in AristonTo check the functioning of the level sensor, disconnect the sleeve. After that, you must turn off the power supplied to the machine. After removing the top cover of the washing machine, access to the pressure switch will be obtained.

The hose is attached to the water level sensor using a clamp. To weaken it, you can use ordinary pliers. Instead, a regular sleeve must be connected to a small piece of another hose, which must be prepared in advance. After fixing it, you can slightly blow into it.

During the operation of the contacts, clicks will be heard. Their number will depend on the number of water levels that are provided for washing programs.

In addition to checking the operation of the sensor, you will need to inspect the connected tubes and clean all the electrical contacts and clean them if necessary. If the contacts in the relay are stuck, then the best solution would be to install a new device. Generally speaking, it is best to repair both individual components and the machine as a whole in a specialized workshop.

   

Reader Comments

  • Share your opinion - leave a comment

Add a comment

Read also

Error codes for washing machines