Error F02 in the Indesit washing machine

The appearance of error codes on the washing machine Indesit indicates a node within the equipment in which a malfunction occurred. It is impossible to say with absolute certainty what exactly could have broken, looking at the error. Even experienced masters cannot do this, and what can we say about a simple user who does not even know the code decryption. We will deal with the error f02 in Indesit pages, find out how to fix it.

Error description

In short, the error f02 means that the circuit in the tachometer is broken, as a result of which the electric motor does not work. It appears like this: you put the laundry in the drum, turn on the washing machine, it draws water, several times tries to spin the drum, but nothing comes out, it stands still. After 2-3 such attempts, this code is displayed.

Code f02 is not the only one reporting a similar problem. If we talk about older units, there is generally no display on which an error would be displayed. In such machines, indicators on the control panel or a spinning programmer report a problem.

If you notice that the lamp with the words "quick wash" is on or the extra rinse lamp is flashing, then keep in mind that this is error f02.

Reasons for the appearance

The appearance of this error can be caused by various reasons, we list them:

• malfunction of the tachometer responsible for engine speed;
• jamming of the rotor of the engine of the washing machine;
• malfunction of the contacts of the J9 connector on the board;
• engine failure, which happens quite rarely, and in such a situation more often appears mistake F01;
• breakdown of the control module.

Trouble-shooting

To eliminate the cause that caused the F02 error on the Indesit washing machine, it will be necessary to carry out a phased search for this reason. But still, first try to reboot the “brain” of the machine, disconnecting it from the network for about 20 minutes.

If the malfunction is confirmed, start the search in the following order:

1. disconnect the machine from the water supply and sewage system, turn it around with the back side. The washing machine should stand so that it is convenient for you to disassemble it;
2. open the rear service hatch of the machine or the housing cover to see the drive mechanism;
3. remove the drive belt from the drum pulley with one hand, while simultaneously turning the pulley with the other hand;
4. unscrew the bolts holding the engine;
   
5. disconnect all wires from the engine;
6. gently pull it off the mounts and pull it out of the machine;
7. now remove the speed sensor from the engine and check it for serviceability with a multimeter in resistance mode, it should normally be 115-170 Ohms;
   

   To check the tachometer, it is not necessary to pull the motor out of the car.

8. then check the rotation of the engine company, if nothing jammed it;
9. if everything is in order, proceed with checking the terminals and electrical wires going from the engine to the control board.

Having finished with the motor, you need to find a module at the machine. It is located in the back of the washer on the right side relative to the tank, but this is not typical for all models.

Disconnect all the chips from the board and remove it, we recommend that you photograph the location of the wires. Next, check the reliability of the contacts on the J9 connector of the control board, if not, replace them with new ones. Measure the resistance between the first and second contact.

The solution to the problem with the control module, if you find one, it is better to trust the master. But if it’s a matter of principle, repair the board yourself, gain experience. Perhaps on the forum you will find a like-minded person who will tell you what to solder in a specific model of a washing machine, do not despair. If there is no chance, change the module completely, just buy the one already programmed, otherwise there will be problems with the firmware.

In general, error F02 of the Indesit washing machine is solvable, but not in all cases.Give your car to the master or not, decide for yourself.