Error E25 in Bosch Dishwasher

Stopping the Bosch dishwasher during operation is unlikely to please you. Firstly, something could break, and secondly, you have to manually wash all the dishes. And as they say, you get used to the good quickly. But there are no other options, you have to figure out what happened. The error code on the e25 display will help in this, but to fix the problem, you need to know how it is decrypted.

What does this code mean?

Error E25 in this German-made machine informs the user that the pipe that connects to the drain pump is clogged. On some models, this may not be the nozzle, but the base of the drain hose connected to the pump.

Another interpretation of the E25 error is: blocking the drain pump or the absence of its cover.

It is clear that the impeller is blocked in the pump by some foreign object or debris. This error may appear not only with a blockage, but in the case when there is no cover on the pump.

Causes of occurrence

The cause of this error is most often a blockage of garbage and food debris, when the user neglects the simple rules of operation of this technique. In the drainage system of the dishwasher, the following may get stuck:

• bones from meat (fish) or bones from fruits;
• peel from fruits;
• napkins;
• Toothpicks
• splinters that crashed while washing dishes.

Even if you clean the plates of food debris before putting them in the dishwasher basket, this is not enough. Clogging may occur if the user does not wash the machine for a long time from grease. As a result, the fat, accumulating in the nozzle, creates a plug through which the pump cannot pump water. Only one way out - cleaning.

Troubleshoot

So, if the dishwasher stops and there is an error about a blockage, then you, first of all, need to remove the water that is at the bottom of the machine. But first, disconnect the equipment from the electrical network, and then follow these steps:

1. Pull out the baskets with dishes.
2. Remove the lower beam so that it does not interfere.
3. Scoop out dirty water into a separate container.
4. Unscrew the filter cover.
   
5. Remove the filter cup.
6. Inspect what is inside and, if necessary, pat all the water with a thick rag.
7. Take a long tweezers and remove the shutter that covers the pump impeller.
   
8. Inspect the impeller, remove jammed debris with tweezers, check the impeller.
9. Put all the parts in place, check the operation of the dishwasher.

If the work done does not help, then you will have to clean the pipe or drain hose. You can get to these details through the bottom of the dishwasher. We will free the car from dirty water, pull it to an empty place, disconnecting it from the water supply and sewage. Then put the machine on the back wall and unscrew the bottom, be careful not to pull the pallet, wires can go to it, they must be carefully disconnected.

When you remove the bottom, all the details will open immediately. Disconnect the nozzle from the drain pump and clean it. If a hose is immediately connected to the pump, disconnect the hose and completely rinse it using a special cable with a brush. Then return all the parts to their places and check the operation of the equipment.

If cleaning the machine does not help, which is unlikely, then in the Bosch dishwasher, the error E25 appeared due to a breakdown of the drain pump.

If the drain pump breaks down, everything will depend on the nature of the breakdown. The impeller has broken - replace this part in the pump, but if the winding burns out, then replace the entire pump. Do not rely on your abilities and capabilities? Call qualified personnel.

On this we will stop our story. We hope now, you know, for what reason the error E25 can occur in the dishwasher. By the way, if it is interspersed with other errors, then you can see their decoding in the article Bosch Dishwasher Mistakes.