Error code E10 on an Electrolux washing machine
Error E10 on an Electrolux washing machine occurs at the most inopportune moment - in the middle of a wash. In this case, not only does the operation of the machine stop, the hatch is blocked so that you cannot get the laundry out. What to do in such a situation, what kind of error e10 is this, what caused it? We will have to deal with these and other questions within the framework of this article.
Reasons for the appearance of the code, decoding
Error e10 on an Electrolux washing machine, according to the table attached to the instruction manual for most models, stands for: “there is no water in the tank or little water is supplied.” Such a decoding can be considered more than extensive, because in this case there can be quite a few reasons. In fact, this is true. An Electrolux machine produces a similar error if:
- there is no water in the water supply system;
- there are problems with the inlet hose;
- there are problems with the fill valve;
- there is self-draining of water.
Self-draining of water is a specific expression that is used by specialists when water spontaneously flows out of the washing machine tank due to a breakdown.
The question arises, why are we listing these particular reasons, since there are other error codes in the washing machine’s memory that can clarify the malfunction by localizing the broken unit? Sometimes this happens, but in most cases, either due to the specifics of the model or the specifics of the malfunction, we will be forced to be guided only by the e10 code, keeping in mind the above causes of the malfunction. Because the machine simply does not issue other (refined) codes.
Eliminating the causes of the error
Since our “home assistant” from Electrolux decided to give us error e10, we will have to check one by one all possible elements that are, in one way or another, related to draining and filling water into the tank. It would be more logical to start with the simplest thing, which does not require disassembling the washing machine, because in 90% of cases the e10 error is eliminated at the household level.
We designated the first reason as: “there is no water in the water supply system.” There is no need to explain anything here, because anyone can check whether there is water in the water supply, without instructions. Let's move straight to the second point - a malfunction of the inlet hose. In this case, you must proceed as follows.
- If a water filter was installed on the inlet hose, you need to turn off the water supply to the machine, unscrew the filter and check it; perhaps it is simply clogged with dirt and limescale, and water cannot pass through it into the tank.
- If the hose is double, with leakage protection, check the integrity of the first layer.
- Check the tightness of the connections between the inlet hose and the pipe or machine, although in order for water not to flow into the tank, it would be necessary for the hose to come off completely, and such a problem is difficult to miss.
If everything is in order with the hose, experts recommend checking next to see if there is any self-draining of water. It's not difficult to check. First, lean towards the washing machine and listen, you need to hear the water leaving the tank and murmuring in the drain. After error E10 appears, the machine stops working, which means everything will be clearly audible. If such a sound occurs, proceed as follows. We check the drain hose; under no circumstances should it lie on the floor. If this is the case, raise the drain hose above the floor by about 60 cm.
The worst thing is if the problem is in the filler, drain valve or pressure switch. To be sure to diagnose such a problem, you need to seek help from a specialist. A professional will decide whether it is necessary change the intake valve or other details.
Note! If you do not have experience, it is better not to get into the inside of a washing machine; you will lose a lot of time and effort, and there may not be any results, especially if the machine is under warranty.
Everything is fine, but the error still appears
In rare cases, it happens that error e10 paralyzes the operation of the washing machine for no reason. That is, to be precise, there is still some reason, but it has nothing to do with the supply or drainage of water and the operation of the units that do this. In a word, the machine actually works “like a clock,” but the system still gives an error, what’s the matter?
The cause of error e10 on an Electrolux washing machine may be electronics. Or rather, an electronic control unit. There can be many reasons for the failure of the control unit: voltage drop, frequent shutdown of the machine during operation, manufacturing defects, etc. A specialist will have to figure it out, because you shouldn’t disassemble and test the control module yourself unless you have special knowledge.
In conclusion, we note that despite the fact that modern automatic washing machines are capable of self-diagnosis and generate errors with a certain code, by which specialists can identify the malfunction, problems still remain. In particular, with the same error e10, which can be the result of a whole series of malfunctions, which once again confirms the idea that diagnostics and repair of automatic washing machines are the lot of professionals.
Interesting:
7 reader comments
Add a comment
Categories
Washing machine repair
For buyers
For users
Dishwasher
Before the malfunction appeared, there was noise in the machine. Then E10 was displayed and the car stopped. We turned it on for rinsing, everything became normal.
I tried it and it worked. Thank you.
Thank you! It also helped me to switch to the spin cycle and start it up. Then stop and turn on normal mode.
Thank you for the article! The drain hose was lying lower than expected.
The EWS 1046 machine draws water into the pre-wash compartment, turns the drum several times, turns on the water circulation and that’s it! The other compartment does not fill with water and the code E10 lights up! What could it be? Should I call a specialist, or can I do something myself?
Buy good quality, not brand. There is also a guarantee under which you can exchange the product for a better one.
What are you talking about?