All about washing machines

AE error on LG washing machine

AE error on LG washing machineThe self-diagnosis system of LG cars, as a rule, works without interruptions, displaying codes of various errors on the display. But in order to correct the situation (or at least try to do it) you need to know what combination means what. For example, error code AE ​​or AOE. It is not always possible to fix the problems associated with it yourself, but it's worth a try.

What is this code?

So, the LG washing machine shows an AE error, it is quite possible that this happens right during the operation of the unit. In general, this code indicates SM problems with auto power off or a signal from a float sensor (water level control within the Aquastop system). If the snag really is in it, then it is easily solved, but if the problems arose in the electronic module, then only the master can determine the cause. Diagnosis by a specialist costs from 500 rubles to 1500, and this is not counting the possible repair if the car has to be repaired.

Of course, if you are an expert on electronics, you can try to inspect the module. But remember that in the event of an accidental breakdown, the repair will be quite expensive.

maybe akvastop worked

Initial action

In any case, you should not panic when you see the AE error on the display. False failures are also characteristic of electronic devices, which can be verified immediately without calling a service center or calling a wizard. Just unplug the washer from the mains (with dry hands, of course) for 15-20 minutes. If the problem is a normal failure, after turning on the SM, it will work in the previous mode.

It is also necessary to check the washing machine tray in case the error is highlighted by a signal Aquastopa. See if there is any concern in the pan. If the answer is no, correct all wires and clamps that could be deformed during installation. In some cases, such actions are indeed a solution to the problem.

Characteristic breakdowns and their symptoms

AE error sometimes signals really serious problems in the operation of the machine. It is difficult to diagnose them yourself, but it is quite realistic if you know some features and characteristic signs:there may be problems in the control board

  1. SM operation stops immediately during washing or water recruitment with the corresponding code on the screen. Most likely, the problem is burned out elements of the control board or processor failure. In the first case, the repair is easy to do: just re-solder the elements again, in the second - you need to replace the processor.
  2. The Aquastop system gives out a code for no reason, and water collects for no reason for nothing. In most of these cases, it’s all about the details that ensure that water enters the machine: the cuff of the hatch is leaked, the nozzle is worn, and the tank is perforated. To find out for sure - you need to disassemble the washer and replace the defective parts.

Important! Only professional diagnostics can accurately indicate to the owner the reasons for the appearance of an AE error on the display of his washing machine. In the same way, self-repair will never replace the repair that the master will do.

  1. Aquastop works without water in the pan. Surely, the Aquastop sensor itself, or one of its contacts or wires, got out of fault. Walk through the instrument with a multimeter and, depending on the indicators, decide what to do: replace individual system elements or change the control module completely.

   

Reader Comments

  • Share your opinion - leave a comment

Add a comment

Read also

Error codes for washing machines