Congratulations on purchasing your new washing machine! Now that you are the owner of this useful household assistant, you can finally run your first automatic wash. But before that, your machine needs to be installed.
If it is already installed and connected and these issues were dealt with by specialists, then you can skip the following tips. If you installed the machine yourself or it was done by people who are not professional installers and repairers of household appliances, then you need to make sure that everything was done correctly.
Checking the readiness of the washing machine for operation
To prepare, read and follow these steps:
Check that the transport bolts are tightened. These items are necessary in order to secure the drum of the washing machine during its transportation. They are located on the back of the washing machine. If you find them, it means that the machine cannot be turned on yet. First you will need to remove these fixing elements. The holes that remain in the place where the bolts were must be closed with special plugs. They are included with your new appliance and are included in the kit.
It is advisable to find out what the hardness of your tap water is. This will help you choose the type of powder needed for proper washing and determine its quantity.
You also need to check whether the machine is connected to the network, to the water supply and to the sewerage system.
Check if the tap that shuts off the water in the inlet hose is open.
Throw dirty clothes into the washing machine tub.
Pour the required amount of powder into the desired dispenser tray.
Set the washing program. In some models you also need to select the washing temperature.
Then start washing. To do this, you need to press the start button.
Don’t worry if after washing the machine does not allow you to immediately open the hatch. Typically, after washing, you must wait up to three minutes before the lock opens and allows you to remove the washed items.
Many household appliance repair specialists advise doing the first start “idle”. That is, without laundry inside the drum. It is performed in the same way as regular washing. Only they don’t put laundry in the machine at all. And use less detergent. Despite the fact that all washing machines are tested before they go on sale, it is better to use dry washing. Because it will wash the machine from the inside and prevent the possible appearance of an unpleasant smell from the laundry from the first wash.
Read the instructions!
Before you start using the washing machine, carefully read the included instructions. Yes, many buttons and washing programs are intuitive. But, nevertheless, it is necessary to study information about the correct use of this household appliance even before starting the first wash.
If you immediately start using the machine in accordance with the rules specified in the instructions, you will avoid a lot of possible breakdowns and troubles with your washing machine. In addition, proper handling will increase its service life. That's why Be sure to read the instructions and follow all rules for using this device.
Even if you are already familiar with one or two models of washing machines, we still strongly recommend that you familiarize yourself with the advice that manufacturers give on using this particular machine.
Tips for proper washing
And finally, we will give you some tips on how to properly wash your clothes:
Wash whites and colored items separately. This will prevent the possibility of dyeing light-colored items in other colors.
Between washes, leave the machine hatch slightly open. This way, all the moisture from the drum will not stagnate, but will evaporate. This will help avoid bad smell.
Be very careful that nothing remains in the pockets of the items you are about to wash. Small objects, coins, rings, etc., can damage the machine. And sharp objects, such as a pin, can pierce the cuff. This will cause leaks.
Clean the drain pump filter regularly. It's easy to do. For most models it is located in the lower right part of the machine. Cleaning it will not only allow you to avoid unpleasant odors, but will also protect you from damage.
For high-quality washing, you need to use only powder that is intended for SMA (automatic washing machines). And you shouldn’t fill it with more than 100g. for one wash.
Congratulations again on your purchase of your washing machine. This useful technique will make your life easier and free up a lot of time for you!
Congratulations on purchasing your new washing machine! Now that you are the owner of this useful household assistant, you can finally run your first automatic wash. But before that, your machine needs to be installed.
Before you start using the washing machine, carefully read the included instructions. Yes, many buttons and washing programs are intuitive. But, nevertheless, it is necessary to study information about the correct use of this household appliance even before starting the first wash.
Add a comment