Error codes for Kandy washing machines

Candy washing machine Most Candy cars show error codes. In general, this is a very convenient property of washing machines. If something is broken or some kind of malfunction occurs, the self-diagnosis system informs you of this by showing a set of letters and numbers on the display.

In those models where the display is absent, but there is a self-diagnosis system, information about the error is transmitted by flashing indicators. The code is encrypted in this blink. An error code will help you identify the problem.

This feature will greatly help someone who is about to repair the Kandy washing machine. Whether it’s a professional master in repairing household appliances, called in order to fix a malfunction, or the owner of the machine himself. But in order to understand what the breakdown is, you need to find out what this or that code means. It is in order to convey this information to you, we wrote this article. Further, you can familiarize yourself with the tables, in which all errors will be indicated, their detailed description and reasons. Those that could cause a malfunction. The tables will be divided by Candy washing machine model.

Kandy ActivaSmart washing machines error table

Code	What is the problem?	Why did this error appear?
E01	Problem with UBL (device for locking the door of the washing machine). The door does not lock when closed. And the key indication does not occur.	Possible damage to the door lock. You need to check it, as well as the integrity of the wiring. It is also worth making sure that the electronic controller is working properly.
E02	Problems with the collection of water. Water may not get into the tank of the washing machine. The amount of water for the set time does not reach the desired. That is, it is less than what is needed to complete the program. The amount of water that is needed to complete the program is exceeded.	There is a blockage or blockage in the filler valve. The filler valve is out of order. The level sensor (level switch) or its connections are damaged. The electronic controller is broken.
E03	Water does not drain from the washing machine at all or does it too slowly.	An interruption or violation of the wiring of the drain pump has occurred or it has failed. The washing machine level sensor has become unusable. For example, it may give the wrong signals. The drain system may be clogged. Clogged nozzles, hose, or drain pump filter.
E04	There is a problem with the filling valve. The amount of water in the washing machine tank required to run the program has been exceeded. The level switch indicates that there is too much water in the machine tank. After three and a half minutes, an error occurs on the display.	The fill valve is stuck in the open position and water continues to be drawn, despite the fact that a signal was sent to stop dialing. A controller regulating the operation of the filling valve could also fail.
E05	There is no heating of water to the required temperature. An error “E05” appears on the screen.	The heating element (TEN) or its wiring and contacts failed. The controller could also break. The temperature sensor has become unusable. When checking with a tester (multimeter), make sure that the resistance is approximately equal to two tens of Ohms at an average room temperature. It is necessary to make sure that the program selector motor is working normally. The voltage required for its operation is 220 volts. Winding resistance is approximately equal to 15 kOhm. In addition, you need to make sure that the display and control units are functioning properly.
E07	Excessively fast operation of the electric motor. Three attempts to start the electric motor of the washing machine. And then the washing process is interrupted and the inscription “E07” appears.	The tachogenerator broke. The winding resistance of this part (if it is working) is approximately equal to forty-two Ohms (if the CEZET engine).And for the HUVER electric motor - 156 Ohms. Often such a malfunction appears due to the fault of the core of the technical generator. If it collapsed.
E09	There is a problem with the electric motor of the washing machine. The motor shaft is not spinning. An error occurs, the designation of which you can see in the next column. Automatic testing continues.	Damage to the control unit or failure of the triac.

Kandy Aquamatic washing machine error codes

Error codes for Aquamatic washing machines do not have a display. Therefore, error codes are transmitted due to the blinking of the indicator, which is located in the lower left edge of the control panel. Deciphering the blinking is quite simple. You just need to count it. How many times he blinked, such a mistake. For example, if it blinks 5 times, then goes off for 5 seconds and repeats all over again, then this is error number 5, etc.

Error Code Table washing machines model Aquamatic
Code	How many times did the indicator light?	What malfunction or breakdown occurred?
0	The indicator lights up continuously.	The control module has failed or its normal operation has been interrupted.
1	The indicator glowed once.	The UBL (the lock of the hatch of the washing machine) broke or the contacts were broken, the wires became worthless, and so on.
2	Two indicator flashes	Water is being poured too long or not poured at all. Water is shut off (you need to open the tap on the water pipe). Or the filling valve has deteriorated. A level sensor (level switch) may also be faulty. Water pressure may be too low or the inlet hose may be pinched.
3	Three flashes	Water did not have time to merge at the right time. The drain pump could become unusable or its contacts were broken. Its filter or drain pipes could become clogged.
4	Four flashes	Too much water has been poured into the tank. This could be due to blockage of the filler valve, breakage of the level sensor or its wiring.
5	Five	The temperature sensor is shorted or open.
6	Six times	EEPROM memory failure. Most likely, problems in the operation of the control module.
7	Seven	The motor is locked
7	Seven	UBL recorded in a closed state due to its blocking.
8	8	Short circuit or break of the tachogenerator.
9	9	The triac of the electric motor broke.
12	12	Problems with the transfer of data between the display and control module. Disruption of connection.
13	13	Problems with the transfer of data between the display and control module. Disruption of connection.
14	14	Failure of the control module or its contacts.
15	15	The control module has failed or the program has crashed.
16	16	The heating element is shorted or broken
17	17	Erroneous information from the tachogenerator.
18	18	The control module has become unusable. Problems with the electrical network.