Error codes for Daewoo washing machines
We will analyze the main and most common mistakes that happen with Daewoo washing machines.
OE - water does not drain from the tank of the washing machine.
Why did you get such an error?
The drain pump (pump) or its wiring and contacts may have failed. The drain pump filter or nozzles and the drain hose could also become clogged. In addition, the hose may be improperly connected or pinched.
IE - water is not poured into the washing machine tank or poured, but very slowly.
Why can IE error happen?
This error does not necessarily mean damage to the machine. There is a possibility that you simply forgot to bring the water supply tap on the water pipe to the open position. Therefore, first of all, make sure that it is open. There is still the possibility that for some reason there is no water in the water supply or there is, but the pressure is very weak. To check for this problem, simply turn on the water in the tap. If there is no water when the valve is open, or it is barely flowing, then you have discovered the reason for this error. You can call the housing office and find out when the malfunction of the water supply system will be fixed.
Next, you need to check the mesh filter of the bulk valve. If it becomes clogged with rust or something else, it may prevent the tank from filling with water. To check, we will need to close the water tap and unscrew the drain hose from the side of the washing machine. It is at the junction of the hose with the machine that the mesh filter is located. If you notice that it is clogged, then you need to carefully clean it. It is also likely that the filling valve itself has become unusable. Or a pressure switch (level sensor).
UE - Out of balance in the tank.
In what cases can you see this error code on the display of the washing machine?
The linen is in a lump. It upsets the balance of the tank. In this case, you need to stop the wash, open the hatch and evenly distribute the items to be washed. Also, the cause of this error code may be incorrect installation of the washing machine or unregulated legs. Make sure that the machine is stable and level. If it shakes with gentle shocks, then you need to adjust the legs or align the installation location or choose another.
LE - The hatch door of the washing machine is not tightly closed or there is a malfunction of the UBL (hatch lock device).
For what reasons might such an error occur?
This error code is displayed when the lock did not lock the hatch door in the closed position. This can happen when it is simply not tightly closed or it is skewed. Also, possibly a malfunction of the door lock and the hatch lock device itself. If UBL broke, then it must be replaced.
E8 - Failure of the boot sensor
Why did such an error occur?
Probably the load sensor has become unusable. In order to correct the situation, it is necessary to change it.
E9 - Damage to the pressure switch (water level sensor / water level switch).
What to do with such a malfunction?
Check the pressure switch tubes and their tightness. If the tubes are in order, it is most likely that the water level sensor itself has failed. In this case, it must be replaced.
H6 - An electric circuit broke.
How to fix a breakdown?
First, make sure that the wiring of the heating element (TENA) is in order. If the heating element itself is broken, then it must be replaced.
Interesting:
17 reader comments
Add a comment
Headings
Washing machine repair
For buyers
For users
Dishwasher
SOS guys !!! Yesterday I bought a Daewoo Electronics DWC-UD121’s washing machine. Today connected. Started washing. After half an hour, I crashed and appeared on the display instead of the time b3 or 63. Then it does not erase. What to do? SOS
When there is a smoothing of linen somewhere for 30 minutes, this combination is turned on
In the machine, a double screen glows on the far background of the number 1 8. What should I do?
In loading Daewoo washing machines, the front is clogged by the filter on the drain, from this clogging it starts to shake, and already from the vibration the shut-off sensor terminal pops up. Code LE. We say THANKS.
Thank! I was exhausted with her, I didn’t know what to do ... now I would find how to clean it =)
SOS! The washing machine is running, but time is running out. How to solve a problem?
Hello. Changed the bearing and oil seal. Collected, turned on. It produces this P_t. What is it?
After replacing the bearing, it generates an error P_t or I do not understand P_e. What could it be?
On the DEU washing machine, the display lights up (-). That it means, but the car stops. After the restart, the countdown starts again and again after a couple of minutes, it turns off.
Did you find out what the problem is? Exactly the same with me.
Good afternoon, my 12 kg Daewoo machine gives an E6 error. There is no such code for the models of this brand, help solve the problem.
Hello, the machine DWD-UD 2413K gives an error E6. I can not find the code decryption.
TEN burned out - 100%.
Hello, daewoo dwd ud 2412k washer, error e6 at the very beginning. What to do?
Hello, help fix the problem. 4 diodes above the buttons blink.
Hello, tell me please, it knocks out E8 and the drum does not spin. What could it be?
Hello. The machine stops, burns n8. DWD 2412.