Error codes for Daewoo washing machines
Let's look at the main and most common errors that occur with Daewoo washing machines.
OE - water does not drain from the washing machine tank.
Why did this error occur?
The drain pump (pump) or its wiring and contacts may have failed. The drain pump filter or the drain pipes and hose could also be clogged. In addition, the hose may not be connected correctly or clamped.
IE – water does not fill into the washing machine tank or it does, but very slowly.
Why might IE error happen?
This error does not necessarily mean that the machine is broken. There is a possibility that you simply forgot to open the water supply valve on the water pipe. So first of all, make sure it is open. There is also the possibility that for some reason there is no water in the water supply or there is water, but the pressure is very weak. To check for this problem, simply turn on the water in the tap. If there is no water when the valve is open, or it barely flows, then you have discovered the cause of this error. You can call the housing office and find out when the water supply fault will be fixed.
Next you need to check the mesh filter of the filling valve. If it becomes clogged with rust or something else, it may prevent the tank from filling with water. To check, we will need to close the water supply tap and unscrew the drain hose from the side of the washing machine. It is at the junction of the hose with the machine that the mesh filter is located. If you notice that it is clogged, then you need to carefully clean it. There is also a possibility that the filling valve itself has become unusable. Or a pressure switch (level sensor).
UE – The balance in the tank is out of balance.
In what cases can you see this error code on the washing machine display?
The laundry was bunched up. It upsets the balance of the tank. In this case, you need to stop the wash, open the hatch and evenly distribute the items being washed. Also, the reason for the appearance of this error code may be incorrect installation of the washing machine or non-adjusted legs. Make sure the machine is stable and level. If it wobbles with slight shocks, then you need to adjust the legs or level the installation location or choose another one.
LE – The hatch door of the washing machine is not locked tightly enough or there is a malfunction of the UBL (hatch locking device).
For what reasons could such an error appear?
This error code is displayed when the lock did not fix the machine hatch door in the closed position. This can happen when it is simply not closed tightly or is warped. It is also possible that the door lock and the hatch locking device itself may have malfunctioned. If the UBL is broken, it must be replaced.
E8 – Failure of the loading sensor
Why did this error occur?
The loading sensor has probably become unusable. In order to correct the situation, it is necessary to change it.
E9 – Failure of the pressure switch (water level sensor / water level switch).
What to do in case of such a malfunction?
Check the pressure switch tubes and the tightness of its connections. If the tubes are in order, then it is most likely that the water level sensor itself has failed. In this case, it must be replaced.
H6 – The electrical circuit has broken.
How to fix the problem?
First, make sure that the wiring of the heating element (heater) is in order.If the heating element itself is broken, it needs to be replaced.
Interesting:
22 reader comments
Add a comment
Categories
Washing machine repair
For buyers
For users
Dishwasher
Guys SOS!!! Yesterday I bought a Daewoo Electronics DWC-UD121’s washing machine. Connected today. Started washing. After half an hour it beeped and b3 or 63 appeared on the display instead of time. It won’t erase any further. What to do? SOS
When the laundry is being ironed, this combination turns on for about 30 minutes
The double screen in the machine lights up with the numbers 1 8 in the background. What should I do?
In front-loading Daewoo washing machines, the filter on the drain gets clogged, this clog causes it to start shaking, and the vibration causes the terminal of the shut-off sensor to pop out. Code LE. We say THANK YOU.
Thank you! I was exhausted with it and didn’t know what to do... now I wish I could find out how to clean it =)
SOS! The washing machine is working, but the time does not pass. How to solve a problem?
Hello. Replaced the bearing and seal. Assembled, turned on. It gives out this P_t. What is this?
After replacing the bearing, it displays the error P_t or P_e, I don’t understand. What could it be?
On the Daewoo washing machine, the display lights up (–). What does this mean, but the car stops. After a restart, the countdown starts over and again after a couple of minutes it turns off.
Did you find out what the problem is? I have exactly the same one.
Good afternoon, my Daewoo 12 kg car gives error E6. There is no such code for models of this brand, please help me solve the problem.
Hello, the DWD-UD 2413K machine displays error E6. I can't find the code decryption.
The heating element burned out - 100%.
The heating element is heating.
Hello, daewoo dwd ud 2412k washing machine, error e6 at the very beginning. What to do?
Hello, help me fix the problem. 4 diodes above the buttons flash.
Hello, please tell me, E8 is knocked out and the drum does not rotate. What could it be?
Hello. The car stops, h8 lights up. DWD 2412.
Good afternoon, Daewoo washing machine. When turned on, the ec error appears, has anyone encountered such an error?
Help Daewoo 12 kg shows error H4 and immediately END.
I have the same problem, I can’t find a solution to this error anywhere.
Hello, have you solved your problem with the EU error?