How to change the drain hose of the washing machine?

Replacing the drain hose is somewhat more complicated than replacing the inlet hose. The inlet hose is screwed onto the outside of the washing machine. And in order to change the drain, we may need to partially disassemble the machine. It is connected to a drain pump. Therefore, we will need to climb inside the hull. Depending on the brand of household appliances, the hose may extend outward at the top or bottom of the rear wall of the housing.

In order to understand how it is located inside, it will be better for us to remove the upper part of the body (cover). This is done quite simply:

1. Twist a pair of screws that are in the back.
2. Then push the cover towards the back of the machine.
3. Now you can safely remove it.

Different models of washing machines may have different internal structure and position of the drain hose. Therefore, we propose to consider the features of replacement for machines made under different brands.

We change the drain hose for various models of washing machines: Indesit, Ariston, LG, Candy, Ardo, Beko, Samsung, Whirpool

With these machines you can get to the hose through the bottom. To do this, do the following:

1. Remove the base panel.
2. Carefully and slowly remove the drain pump filter. Prepare a water container or rag. Since it will pour from there.
3. In order to make it convenient to get below the machine, we need to move it away from the wall and tilt it.
4. We remove the bolts or other fixing element of the cochlea. Then remove it.
5. Now we relax the clamp that secures the hose to the drain pump and disconnect the hose.
6. Before you completely remove the old hose, you need to remember how it is fixed inside the machine. If you wish, you can take a photo. Then we unfasten it, pull and take out the washing machine. You may need to remove the top of the cap to make it easier to remove the old hose and replace it with a new one. How to do this, you can read above.
7. Install a new drain hose. We fix it on the pump with the help of a clamp. And we return all the removed parts of the machine to the place.
8. Do not forget to make sure that at the joints of the joints the connections are reliable and there will be no leaks. Also pay attention to the tightness of the new hose.

Changing the hose for AEG, Siemens and Bosch machines

In such machines, in order to get to the hose, we need to remove the front of the case.

Let's take a look at the entire replacement process in more detail:

1. First, remove the dispenser container.
2. Then we remove the base socket.
3. Weaken and remove the clamp that secures the rubber cuff of the door. After that, we unfasten the cuff from the front wall of the housing.
4. Remove the drain pump filter and drain the water into a pre-prepared low tank.
5. We twist the screws that hold the front of the machine.
6. We pull the bottom of the wall in our direction by a couple of centimeters, then we shift it below and gently pull on ourselves. It is necessary to make sure that a gap of about 5 centimeters is formed.
7. From the inside, you need to grope the hatch blocking device. It is located where the lock hook enters the hole when closing the door. It is necessary to disconnect the connector with wires from this device.

Now let's change the hose

1. By removing the front wall, you have opened access to the hose. Now you can remove its fixing elements and disconnect it from the pump.
2. After that, remember or take a photo of the location and attachment of the hose.
3. Disconnect the hose and take it out.
4. We stretch and connect a new hose to the pump and mounts.
5. We collect the machine.
6. We check the tightness of the joints.

How to replace the hose of cars Electrolux and Zanussi

For these models, we need to remove the back wall of the case for replacement.

1. We start from the top of the case. It is also better to remove it. To do this, unscrew the screws on the back. Then push the cover from front to back and remove it.
2. Now unscrew the screws that hold the back cover. In some cars, they can be hidden behind the caps.
3. Remove the filler valve lock and open the back of the machine.
4. It's time to take up the hose. Straighten it and lay it on the floor. In this position, the remaining water will flow out of it. It can be cleaned with a rag or drained into previously prepared dishes.
5. We remove the fixing hose to the collar drain pump and unfasten the old drain hose.
6. Carefully study how the hose is attached to the machine from the inside. If desired, you can take a photo. Then we remove it from the clamps and pull it out.
7. We take a serviceable hose, pull it inside the machine, fix it on the pump, put on all the fasteners.
8. We assemble the car.
9. Check the hose by running a test wash.

How to change the hose for machines with vertical loading of linen?

For such machines, we will need to remove the side of the case.

1. We twist all the screws from the side of the machine body. They can be on the back of the case and on the front side below.
2. As with other models, remove the clamp and detach the hose from the drain pump.
3. We take a picture or remember the location and methods of fixing the hose.
4. We unfasten all the fasteners and remove the hose.
5. We take the prepared serviceable hose and install on instead of the shot. Just fasten everything, as it was.
6. We assemble the washing machine and check the hose by washing.