All about washing machines

Manual for washer Bosch Logixx 6 Sensitive

manual for Bosch Logixx 6 SensitiveThe Bosch Logixx 6 Sensitive is a well-known brand and highly reliable top-loading model from a German manufacturer. You can manage it without any instructions, as indeed, many housewives are used to doing. However, sometimes situations arise that it is simply impossible to correctly resolve on an intuitive level. This is where the instruction will help, a brief version of which you can read in this publication.

Getting ready to connect

Before packing a washing machine of this brand, the company prepared it for transportation, namely, secured the necessary components on the case and screwed the transportation bolts. So, at the first stage, our task is to free the washing machine from packaging, check that all the declared components are in place and, of course, unscrew the indicated fasteners, whose task is to fix the moving parts of the washing machine.

Note! Having unscrewed the transportation bolts, do not forget to close the formed holes with plugs so that dirt and dust do not clog inside.

device washing machine Bosch Logixx 6 Sensitive

Now about the installation site. Install the machine in accordance with the requirements contained in the factory operating instructions.

  1. The place for the washing machine should be convenient, in the sense that there should be a free approach to it, which is not blocked by any interior items.
  2. There should be a gap of at least one centimeter on the sides of the machine body, and 10 cm should be left behind. Nothing should be on top.
  3. Bosch Logixx 6 can only be placed on a flat and hard surface, there should be no fabric flooring. The "playing" floor should be qualitatively strengthened. It is not advisable to lay parquet and laminate under the body of the washing machine. Although this machine leak proof, the likelihood of such a nuisance is still there, so do not risk expensive floor coverings.
  4. Water, sewage and electricity must be connected to the proposed installation location of the washing machine. Certain requirements are made to the connection of communications, which we will talk about a little later.

Drag the washing machine to a pre-prepared place and free the hoses from the fixtures. Be extremely careful, do not drag the machine alone, because it is very heavy. After moving the machine to the installation site, take the building level and, alternately twisting the legs of the washing machine, level it as best as possible. The allowable difference is not more than 2 degrees.

We connect to water and sewage

We take the inlet hose equipped with the Aqua Stop system and connect it to the outlet of the inlet valve of the washing machine, which is located in the upper part of the body. When screwing the hose, do not forget to put the rubber o-ring, which is included in the kit.

connecting the washing machine to the water supply

Next, we shut off the water and unscrew the hose going from the water pipe to the faucet with cold water from the mixer. We install a tee tap with ¾-inch outlets by screwing one end of it to the water pipe, we screw the mixer hose to the other end, and the third remains free. It is to the free exit of the tee that we screw the second end of the inlet hose of the washing machine, not forgetting to insert the o-ring. Tighten the hoses securely, but try not to overtighten.

When installing a tee tap, do not forget to wind up the cigarette holder against the thread so that the connection is as tight as possible.

connection to the sewerage through a siphon

Now connect the drain hose to the sewer. There are several connection methods. You can simply throw the free end of the hose into the sink, toilet or bathtub. This version of the drain is not aesthetic and will make you wash the plumbing more often. You can withdraw the drain of the sewer pipe and insert the hose into it.At the same time, the connection must be sealed so that water, during the operation of the pump, does not splash onto the floor.

The third option is the most aesthetic and relatively simple. All you need is to install a siphon with a lateral outlet for the washing machine, to which a drain hose will be connected. We pull the hose onto the side outlet of the siphon, fix it with a hose clamp and that’s it. It is done!

We connect to the power supply

moisture resistant socketThe easiest step in installing a washing machine is to connect it to electricity, but provided that all electrical communications are properly prepared in advance. What is this about?

  • Firstly, a moisture-proof outlet must be installed, since a washing machine is a technique that is operated with water.
  • Secondly, the outlet must be grounded.
  • Thirdly, the socket should be powered by a three-core copper wire with a cross section of 2.5 mm.
  • Fourth, the outlet must be protected by a difavtomat.

If you experience severe voltage drops, it is better that the Bosch washing machine is powered by a special stabilizer.

If you do not have experience with electrical networks, do not take this matter on your own. It is very dangerous. Invite an experienced electrician who organizes your outlet quickly and professionally.

Specifications

Now briefly about the technical characteristics of the Bosch Logixx 6 washing machine. According to the factory instructions, the dimensions of the machine body are W x D x H - 40 x 65 x 90, taking into account the protruding parts. The mass is about 58 kg. Power is about 2.3 kW. Voltage 220-240 V, 50 Hz. The minimum water pressure is about 1 bar, the maximum is 10 bar (100-1000 kPa).

This is the entire shortened version of the instructions. There is very little information, but we have collected all the most important here. If this doesn't seem enough to you, read the factory instructions that came with this article. Good luck

   

Reader Comments

  • Share your opinion - leave a comment

Add a comment

Read also

Error codes for washing machines