Electrolux washing machine does not drain

An automatic washing machine has long been a must-have in every modern apartment. One of the most popular copies can be considered the washing machine Electrolux. And it is deserved. After all, it is distinguished by reliability, structural strength and high quality washing.

With all the significant advantages, there is a drawback. As a rule, if the light bulbs on the panel indicate an error, then the machine does not drain the water. Let's try to figure out what the source of the problem is and what needs to be done in this situation.

Why is the drain impossible?

The first step is to find out why the drain does not work. There are several options.

1. First look at the hose, it drains water into the sewer from the washing machine. Something from the washing machine could get into it, and the object will not allow water to pass through. And if he joins with a siphon, then the problem may be in the latter.
2. Small items, such as coins or buttons, sometimes get into the filter during washing. Due to clogging, it becomes impossible to drain the water.
3. Inside the machine there is a drain pipe between the tank and the pump. Perhaps something fell into it and the water does not pass.
4. The cause of the problem may be a pump that pumps water. In this case, you will also hear a specific hum. This part has a limited life of up to 5 years.

An electric motor and a shaft with a plastic impeller can break in it. Threads, laces, hair are usually wound around it and become the cause for an accident.

If the washing machine has been working at your place for a long time, then you need to pay attention to the electronic component. Damage is possible due to natural wear of the module or a sharp surge in voltage.

It may also matter how long the drain hose is. Traditionally, the length is one and a half meters. And the pump power is designed specifically for such sizes. And, if not so long ago you decided to rearrange not a new washing machine and had to build up the hose, then perhaps the problem is precisely because of this. The washing machine not only does not drain the water, but also does not squeeze out the laundry? Then you need to make sure which program is set. Perhaps this feature is simply disabled.

As a rule, modern equipment is equipped with an electronic display that can help determine the cause of the malfunction (the machine will give an error code). The instructions also spell out combinations of illuminating lights that signal a problem in cars without a display.

There are problems that cannot be fixed on their own. For example, when a washing machine draws water and drains immediately. Damage can be in the electronic module, the water inlet valve has broken or the water level switch has failed.

First remove the water

So, having determined why the machine refuses to drain the water, you must do it manually. There are several tricks you can use.

1. Through the filter. Prepare a container where you will drain the water from the tank. Please note that there will be a lot of fluids and you will need several of them. Unscrew the filter. Water should flow out quickly. When the flow decreases, tilt the machine forward and try to drain everything to the end.
2. Unscrew the filter, but the water did not go? So the pipe is clogged. Sometimes you just need to move it slightly, and the liquid will pour. Otherwise, it must be cleaned and then it is possible to drain it.
3. If your actions did not lead to a result and the water from the tank does not drain, then you can lower the hose inside and pour it into the container located below.

In any case, your task is to try to make sure that there is absolutely no liquid left in the washing machine.

Procedure for troubleshooting

Having dealt with the first problem, we will try to fix the problems. The very first thing to do is to disconnect the equipment from the electricity.If you drained the water through the filter, then you have already seen if it was clogged and cleaned the pipe. If you got rid of water with a hose, unscrew the filter. A small amount of water is draining, prepare a container or a rag. See if anything has got into this compartment. You have completed all the above steps, but the machine still does not drain the water.

Check the drain pipe. You will have to try and disassemble the machine a bit by unscrewing the fixing screws of the drain assembly. Then remove the pipe and probe with your fingers. If there is a blockage somewhere, you can feel it. After cleaning, we install all parts in place and tighten the screws.

We already wrote that threads, hair or laces wound around the impeller can become a source of breakage. How to check it? It is located right behind the filter. Try to spin the impeller. In case this is not possible, she jammed. Have to free her from interfering objects. If after these actions the impeller does not start spinning, then the problem is inside the pump.

If it is damaged, you can check it yourself. What do we have to do? Unscrew the filter. Program the washing machine in spin mode. Next, look into the drain hole. You can use a flashlight. The impeller in your case will be motionless.

But there are situations when the impeller rotates, but the machine is still malfunctioning. This usually happens in older devices. It works on the spin, but not on the drain. This situation occurs from the natural wear of components. Due to incorrect operation of the magnet, the pump wedges and the machine does not wring.

Why is this happening? The magnets are located in a plastic cup inside the pump. Voltage falls on its winding, and provides movement of the rod. Protects cuff from water and dirt. If it is damaged, the work of the part is disrupted.

After 7 years, the magnets themselves may become weaker, which will lead to a weakening of the pump power and malfunction.

Have to replace the part. You can easily identify such a problem by the characteristic noise in the "Spin" mode. However, the program does not perform the specified function. It may be necessary to replace the drain pump.

Blame the drain pump

Drawing conclusions from the foregoing, if your washing machine began to buzz heavily, but at the same time it does not squeeze the laundry and leaves the water, then the problem is the pump malfunction. The problem is quite serious, but repairs can be done with your own hands.

The replacement instruction begins with the need to remove the drain assembly. Then unfasten the drain pump. Disconnect old wires. Swap old and new parts. Connect the wires. Only after that we connect the washing machine to the power supply. And carry out a test wash. If this time too, the water drain does not go well, then you cannot do without contacting the after-sales service.

Use the machine correctly

How to avoid all these troubles and increase the life of the equipment? There are a few simple rules that you must follow.

1. Pay attention to the parameters prescribed in the passport for your washing machine. Namely, the maximum weight of the laundry recommended for one wash. In the case when you overload the device, then it has to work at the limit of possibilities. And this, of course, significantly increases the risk of an accident.
2. Always check your clothes before loading them into the washing machine. Firstly, pockets. Coins, headphones, candy wrappers, pieces of paper, pins, or even paper clips may remain in them. Secondly, any small details of clothing. For example, buttons, beads, locks. Make sure that they are securely fastened. All these foreign objects can become a source of damage to your equipment if you accidentally get into the structure.
3. Usevoltage stabilizer when connecting the machine to the network. This will protect your equipment from power surges.They can significantly degrade the operation of the electronic module or completely disable it.
4. Clean the filter regularly. It is recommended to do this procedure every six months. But, if you check his condition at least once a year, this will help to avoid further troubles. Most often this is why the washing machine stops draining water.

Also do not be lazy, study the washing programs laid down in the model of your equipment. Before starting work, check that the parameters are set correctly. Organize preventive flushing every year to protect the machine components from scale and dirt.

Pour any descaler and laundry detergent. Display on the electronic board the program with the highest water heating temperature. Without laying laundry, carry out a full wash cycle. Following these simple tips, you will increase the life of your washing machine and avoid the hassles of damage to it.