Different. Page 26

Among all the methods for installing a knife handle, the easiest is mounting. It does not require glue, bolster, rivets or other fasteners, which allows you to equip the blade with a handle even in the field, for example, if the old one is cracked. To

A lathe is a universal piece of equipment that allows you to perform various types of work, including the production of taps for threading. Let's look at how to do this using an M14x2.0 mm tap as an example.

A drilling machine is a useful thing, but expensive and bulky, so for most workshops a drill stand is better suited. You can make such a device yourself from old shock absorbers and unnecessary scrap metal.

If you need to join 2 pipes of the same diameter at an angle without welding, you can use one trick that will solve the problem quite reliably and beautifully. This method is applicable almost everywhere except assembly

Purchased factory hoes lose their sharpness during operation, so they need to be sharpened periodically. It's not too difficult, but it's much easier when the hoe sharpens itself and doesn't require any attention at all. You can make such a tool from

A universal puller for disassembling connections with guaranteed tension (pulleys, bearings, bushings, etc.) will come in handy in a home workshop. You can make it from a bottle-type hydraulic jack, spending a little time and effort.

To motorize a small boat, you can assemble a motor driven by a cordless screwdriver. It is lightweight, inexpensive to manufacture, and can be removed from the stern in one motion.

Old broken hard stainless steel scissors can be used to make a pocket knife. This is an interesting project, for the implementation of which all you need is a basic tool, maybe even a manual one.

The so-called Turkish tourist burners are equipped with a large 5 liter gas cylinder.This makes them prohibitively large for walking and cycling. However, they are equipped with very reliable shut-off valves that exceed the service life

To care for plantings of potatoes, tomatoes, onions and other vegetables, you can make a manual cultivator. It loosens and weeds out weeds from rows many times faster than can be done with a hoe. By sacrificing an old bicycle for its production,

If it is necessary to disassemble a wooden window frame for repairs, it is very difficult to dismantle the glass held in place by dried putty. It takes hours to scrape it off with a screwdriver, chisel or knife. The process can be accelerated using a mechanized method,

To practice kicking and punching techniques, it is convenient to use a floor dummy. It will be useful for both athletes involved in combat disciplines and amateurs. Unlike a punching bag, it can be placed outside in any place for training on

A simple way to color eggs that does not require special skills, but the result is amazing. Each egg has a unique pattern that is never repeated.

PET bottle caps are made from virgin polyethylene.This is food grade plastic with a melting point of no more than 135 degrees Celsius. It is an excellent raw material for processing at home. Lids can be melted into

Using thin sheet metal for cladding, or making decorative panels out of it, for reinforcement it is necessary to extrude a relief on its surface, which acts as a stiffener. It prevents the sheet from being pushed through when pressed lightly, to

Roller shears are very useful for trimming edges on sheet metal or plastic. Unlike conventional ones, they make an even, smooth cut without burrs. If you have a lathe, this tool can be assembled at home.

With the advent of almost every drill, screwdriver or drilling machine, making holes is done exclusively by drilling. The presence of such a tool made it possible to abandon the old techniques that were used before its distribution.

Having accumulated 15-20 plastic bottles, you can make a homemade, convenient broom for cleaning your workshop or yard. Due to the rigidity of the raw materials used, it is practically eternal, does not break off like analogues made from branches, and is not afraid of water.

Good day to all! I have long dreamed of making a craft from PP pipes, namely making a newspaper rack. I previewed a lot of sites and was attracted by the idea of ​​a lamp, which I took as the “basis” of my work.

During the period of self-isolation, one has to adhere to austerity regime, so in this project I used material that was left over during the construction process.

Quite often you can find a gluing option using super glue and baking soda. This combination really works if you need to increase the contact area of ​​the parts being connected. You need to apply glue at their junction, and then

If you have a small area with several beds, it is rational to use homemade drip irrigation based on a plastic bottle. Unlike purchased systems, its installation will be free. When adjusted and used correctly

Soda and beer bottles are made from craft-friendly thermoplastic that can be used to make dozens of useful things. This is the most suitable material for recycling at home. Usually bottles

An ordinary hoe can do most of the work in the garden and garden, but not all.For complex tasks, it is more convenient to use a homemade weighted hoe made from a pipe. She easily cuts down young trees and wheatgrass bushes along with