DIY do it yourself
Master classes, instructions, useful tips, recipes.
» »Homemade folding barbecue
We all love spring, summer ... the time when you can go out of town on a picnic with family and friends. But what a picnic without barbecue? Not always in the place where you arrive, there is material for the construction of a stand for skewers, barbecue. Therefore, I decided to make a small, compact folding barbecue.
There are many different types of barbecues on sale, but they cost differently ...
My brazier cost me nothing ...

Homemade folding barbecue

Homemade folding barbecue

Homemade folding barbecue

Homemade folding barbecue


All we need is:
1. Steel bar 3m long with a diameter of 4mm-8mm
2. Galvanized sheet 1.5mm I used old exterior window sills
3. Welding
4. Scissors for metal or grinder
5. The hammer

Homemade folding barbecue

Homemade folding barbecue


Photos of the manufacturing process itself, unfortunately, no. But I think that from the blueprint that I made to everyone, everything will become clear ...
And so we transgress.
Steel rod mode into pieces sizes, which are indicated on the drawing fig. And this will be our base, the racks on which the side panels will be worn ..
Such racks will be 2pcs. fold and weld the cut rods. From the bottom of the rack it is advisable to sharpen it slightly, so that it is better to insert it into the ground. Heavily sharp is also not advisable, since during transportation with sharp ends it can be damaged, or damage the bag or bag ...
Start manufacturing side panels.

Homemade folding barbecue

Homemade folding barbecue

Homemade folding barbecue

Homemade folding barbecue


In the drawing they are indicated by fig. b), fig. at).
Using a nail and a ruler (I could do this with a pencil and chalk), mark our future panels on a galvanized sheet, cut them out with a grinder or scissors.

Homemade folding barbecue

Homemade folding barbecue

Homemade folding barbecue

Homemade folding barbecue


We should get 2pcs blanks in fig. B) and fig. at)
The dotted line in the drawing indicates the bend line at an angle of 45 and the dotted line with a point of 180

Homemade folding barbecue


Also in the drawing:
b ’) - side view of the panel b)
’) - front view of the panel c)
in ’’) - side view of the panel c)
After everything is done, it remains to sharpen the sharp ends of the sheet slightly, this can be done with a file or in a circle for sharpening the cutters.
Brazier is ready !! I wish you a pleasant stay!

Homemade folding barbecue

Homemade folding barbecue

Homemade folding barbecue
come back
Comments (4)
  1. the torus
    #1 the torus Guests September 22, 2013 17:12
    1
    well done. but galvanized onto the walls ... a skewer would still be made of titanium
  2. Vladimir
    #2 Vladimir Guests September 30, 2013 17:30
    1
    The grill, as seen in the photo, is made of galvanized iron. When heated, zinc will evaporate and settle on food, which is not very good for health.
  3. Sergey
    #3 Sergey Guests March 26, 2014 15:49
    1
    The meaning of the barbecue is not only the presence of walls. In many countries, it is forbidden to burn fire in open land. Peat bogs and all that. The bottom should be mandatory, especially it will not add weight. And of course galvanizing. Have pity on yourself. Use stainless
  4. Andrei
    #4 Andrei Guests May 31, 2014 17:39
    1
    Galvanization of course not present, a bunch of old washing machines (stainless). tinkered but forever !!! and to the bottom of the pebble from the shore.

Read also

Error codes for washing machines