- transparent soap base
- food coloring
base oil – almond
- almond essential oil
- molds
titanium dioxide
We cut the base into equal pieces so that it melts easier.
We divide the base into 4 equal parts.
We color the first part red by adding red food coloring to it.
We do the same with yellow and green colors, coloring the second and third parts of the base. To give flowers a matte finish, you can add a little titanium dioxide powder to the base.
Pour the finished colored soap bases into molds: red, yellow and green
We put the molds in the refrigerator so that the soap hardens faster. After about 15 minutes you can take them out and remove them from the molds.
Take a green round piece and cut it into equal sized cubes
We do the same with the yellow and red roundels.
We pour the colored cubes into a plastic mold (I used a food storage container)
We melt the remaining fourth part of the soap base, add oils and titanium dioxide to it to form a white matte mass.
And fill our cubes with the resulting mass.
After half an hour, the soap will harden and can be removed from the mold.
If the block turns out to be too big. Cut it into 2 pieces with a knife. Happy swimming!
