DIY do it yourself
Master classes, instructions, useful tips, recipes.
» » » »How to make a simple and unusual box of alder and capa
I propose to create such an unusual box from a tree that is completely familiar to all of us - alder, and burl - growth, which is quite common in the forest. In this box you can store absolutely any things, various little things, jewelry. The main thing in the manufacture of the box is to include your imagination, show your imagination, because you are not at all limited in the type of wood, the size and shape of the product, and the number of inserts. The alder was chosen because this tree is very common, it is easy to process and at the same time, the alder has a special drawing, which has its recognizable features.
How to make a simple and unusual box of alder and burl

Will need


To make the box we need:
  • -Two alder planks with a width of 750 mm, a length of 115 mm, a height of -20 mm.
  • -Kap alder (you can use any other species of wood that has an unusual pattern).
  • -PVA glue.
  • -Lac.

Instruments:
  • -Hacksaw.
  • Milling cutter.
  • - Clamps.
  • -Back paper (different from smallest to largest), file.
  • - Chisel, knife.

Making an alder and capa box


1) To make the lid, take one of the planks and mark the notches for wooden inserts on it with a pencil. The recesses can have a different shape, it all depends on your imagination.
How to make an unusual alder and capa box

2) To fix the workpiece we use clamps and trim boards. Using a milling cutter, a hacksaw and a knife, we select the excess wood and smooth the surface with sandpaper and a file for the best gluing.
How to make an unusual alder and capa box

How to make an unusual alder and capa box

3) The next step is to make inserts and glue them. To do this, saw off a couple of flat boards from the cap and cut out the inserts from them and grind it.
How to make an unusual alder and capa box

How to make an unusual alder and capa box

We put glue on the inserts and clamp the cover with clamps.
How to make an unusual alder and capa box

At the same time, in order to avoid possible dents and scratches, small gaskets should be placed on both sides of the clamp and the cover.
How to make an unusual alder and capa box

4) Next, we make the base of the box itself. To do this, on the second board, draw the walls of the casket 8 mm thick and remove the excess wood with a milling cutter (straight or rounded milling cutter). Leave the bottom 5 mm thick. With large emery paper, we finally align the bottom and round off the inner edges.
5) In order for the box to close, we will make a protrusion in its cover. With a hacksaw
we get cuts of the same depth (3-6 mm). We remove the excess with a chisel and a file.
How to make an unusual alder and capa box

How to make an unusual alder and capa box

6) We process the box with large emery paper, removing the protruding parts of the inserts.
At the grinding stage, special attention should be paid to the tray, because its structure can be revealed only with high-quality and long-term grinding.
How to make an unusual alder and capa box

7) When the product is completely polished, it can be coated with any varnish, oil or a special coating on wood.
How to make an unusual alder and capa box

It takes very little time to make this box. It has a simple design and therefore can serve you for many years. Such a unique thing, made by yourself, will be a great gift to any person for different occasions.
How to make an unusual alder and capa box

How to make an unusual alder and capa box

Alexey Maksimovich Fedotov St. Petersburg.

How to make an unusual alder and capa box
come back
Comments (0)

Read also

Error codes for washing machines