DIY do it yourself
Master classes, instructions, useful tips, recipes.
» »How to make a hot glue hammer
Some materials require particularly delicate and accurate handling when working with them. In such cases, a rubber-headed hammer or wooden mallet is best suited. Without them, repair work is often impossible or difficult. They are used when laying a laminate, parquet board or ceramic tile.
How to make a hot glue hammer

Stone and roofing works, installation of glazing beads on windows and even straightening of car cladding parts proceeds faster and of higher quality if you use a hammer with an elastic head.

Tools required for work


We will need a variety of tools, but in small quantities, which cost almost nothing or are available in almost every home.
How to make a hot glue hammer

Materials:
  • thermoplastic adhesive rods with a diameter of 11 mm and a length of 300 mm - 4 pcs .;
  • pure water - 200 ml;
  • steel or wooden rod with thread at one end;
  • glass container of the required volume;
  • laundry soap;
  • plastic bags - 2 pcs.

Instruments:
  • a gun with sticks of hot glue;
  • homemade vise made of wood;
  • 10 mm drill;
  • a knife or other suitable cutting tool;
  • glass cup;
  • hammer;
  • drill.

Also, in the process, we may need the functions of a microwave oven and a domestic refrigerator. And since you have to deal with heated substances, it is necessary to use protective gloves and glasses, and provide for ventilation of the working area.

Making a hammer from thermoplastic glue


1. Heat the microwave in a glass cup to 100 degrees Celsius.
How to make a hot glue hammer

How to make a hot glue hammer

Pour boiling water from an electric kettle and carefully immerse a glass container in it so that it does not crack.
How to make a hot glue hammer

At the next stage, pour molten glue into it, which will slowly cool with the water in the cup.
How to make a hot glue hammer

How to make a hot glue hammer

2. Using a gun, fill the container with molten thermal glue, making sure that water from the cup does not get into the bottle with glue as it is filled and immersed in water.
3. Let the glue in the bottle, immersed in a cup of water, cool in the open air for 1 hour. After this time, the system will still remain warm. Now we put the glue in the bottle in the refrigerator and leave it there until it cools completely and, accordingly, the glue hardens.
How to make a hot glue hammer

4. When the glue in the bottle has completely hardened, take it out of the refrigerator, wrap it in plastic bags and carefully break the bottle, for example, throwing it on a tiled floor.
How to make a hot glue hammer

How to make a hot glue hammer

5. When at least one crack appears on the bottle, its further destruction can be continued by careful and precise hammer blows.
How to make a hot glue hammer
Then we remove the fragments from the surface of the hardened glue with our hands in protective gloves.
How to make a hot glue hammer

6. After removing all visible glass fragments, the surface of the hardened glue is washed several times with soapy water and rinsing, removing dirt and small invisible particles of glass. Then wipe dry the volume formed by the hardened thermoplastic adhesive.
How to make a hot glue hammer

7. Cut off with the help of a knife, saw or string from the main array of hardened glue the part formed by the neck of the bottle. For the formation of a mallet head, one should not mix different types (colors) of thermoplastic rods.
How to make a hot glue hammer

8. We clamp the hardened and completely cleaned form into a home-made wooden vise and, using a drill fixed in a drill or drilling machine, make a hole in its center, the depth of which is 75% of the diameter of the head of the glue hammer.
How to make a hot glue hammer

How to make a hot glue hammer

We screw into it a steel or wooden rod with a thread on the end that serves as a handle.
How to make a hot glue hammer

Our glue hammer is ready to work and its working properties are not inferior to a hammer with a rubber head or a wooden mallet.
How to make a hot glue hammer

When performing carpentry, a rubber or wooden mallet is often used together with other common tools. So, using a rubber or wooden striker, you can extend the safety and performance of tools such as chisels or chisels.
A rubber mallet or a wooden mallet can be purchased at the store, spending a certain amount of money (from 250 rubles). But there is an opportunity to make this tool from thermoplastic glue, possessing elementary skills in handling hot water, hot glue and simple tools and equipment.
How to make a hot glue hammer

come back
Comments (3)
  1. Vita
    #1 Vita Guests April 19, 2019 07:59
    1
    Recently, we had a discussion with one author about the manufacturing technology of such a product. The author is also weak with technology, and translates good material. Let him take linoleum (polystyrene), a solvent with a solvent. can add filler - sawdust, or something else, and makes from this mass what the soul desires.
    1. KV54DFG
      #2 KV54DFG Guests April 20, 2019 11:59 p.m.
      5
      So the floor is the same, reference, labor “DIY (tm) (c)” - “Self-madeness regardless of costs” - when exactly 100 kg of toilet paper is received from a kilogram of 100 dollar bills.
  2. Roman Viktorovich
    #3 Roman Viktorovich Guests April 19, 2019 5:54 PM
    3
    so much hot glue will cost more than a new mallet

Read also

Error codes for washing machines