DIY do it yourself
Master classes, instructions, useful tips, recipes.
» » » »Mini do-it-yourself bending machine
When performing carpentry and other work, mounting corners may be required. Sometimes they really need a lot, which flies a pretty penny. It is much cheaper to do them yourself, using a miniature listogib. As a material for the manufacture of corners on it, you can use tin or aluminum sheet cut into strips.
DIY listogib do it yourself

Materials:


  • corner 30x30 mm - 60 cm;
  • steel strip 70 mm wide - 15 cm;
  • strong window hinges - 2 pcs.;
  • bolts, nuts, thumbs.

Making a sheet bending machine


First you need to make the main workpiece. A piece of 15 cm should be cut from the strip. The corner is cut into 4 pieces of 15 cm each.
DIY listogib do it yourself

DIY listogib do it yourself

Handles of the machine are made from two corners. One hole is made in them. You need to drill in the center of one of the sides at a distance of 12 mm from the edge, as in the photo. Important! The hole in the second corner is made in mirror image relative to the first workpiece.
DIY listogib do it yourself

DIY listogib do it yourself

The remaining 2 corners are connected by a pair of strong window hinges. For this, a pair of through holes is made in each of them. You need to get the design, as in the photo.
DIY listogib do it yourself

DIY listogib do it yourself

On the corners connected by loops it is done through an opening for joining handles. You need to drill at a distance of 12 mm from the edges, as in the photo. At one corner, another hole is made from the second edge at the same distance.
DIY listogib do it yourself

On the segment of the strip, you need to make 2 holes at a distance of 12 mm from the edges. It is important that they completely coincide with those that are on one of the corners with loops. At the same time, they need to be shifted 3 mm closer to the long side.
DIY listogib do it yourself

DIY listogib do it yourself

Now you need to assemble all the parts together. The corners for pens are substituted from below under the workpiece with loops. The machine side with one hole is pulled together with a short bolt. In the half with two holes, long bolts with flaps are used. This allows you to grab and squeeze the strip.
DIY listogib do it yourself

DIY listogib do it yourself

DIY listogib do it yourself

How to use


A plate of soft metal or sheet metal of the desired length can be inserted into a listogib under the strip. It is set exactly 90 ° relative to the machine parts. The workpiece is clamped by twisting the lamb. After that, pulling the handles you need to bend the listogib. In this case, the plate will bend into the mounting bracket. Further in it it remains to make a hole and use it for its intended purpose.
DIY listogib do it yourself

DIY listogib do it yourself

DIY listogib do it yourself

The machine is done very quickly, and with a minimum set of tools. The resulting corners can be used in the manufacture of homemade of furniture, cages for animals, strengthening frame structures, etc.
come back
Comments (0)

Read also

Error codes for washing machines