Do it yourself
Life hacks, master classes, useful tips, recipes.
home » Different » Crafts » Wood crafts » Restoring broken holes for door hinge screws
Restoring broken holes for door hinge screws

Interior doors in our apartments and houses last for decades, but if there are small children who love to ride on them, this period can be significantly reduced. The screws connecting the door leaf to the hinges break the wood over time and may even fall out completely. A thicker screw does not solve the problem, especially if it is a bathroom door. This is where the load is heaviest, and there is also high humidity. All that remains is to fix the door yourself, especially since it is not so difficult to do.

What tools and materials will we need?


  • 2 wood drills 9.5 and 2 mm, as well as a drill or screwdriver;
  • Wooden dowels 9.5 mm thick;
  • Wood glue and a thin brush (the kind that children use to paint);
  • Hammer and screwdriver;
  • New self-tapping screws (yellow/white, but not black - they can break under the head with great force);
  • Old dish sponge.

Restoring broken holes for door hinge screws

Restoring broken seats for door hinge screws


We drill out the broken seats to the permissible depth (you can completely “flash” the frame beam into a hollow door, nothing bad will happen).We try on a wooden dowel (but do not insert it all the way!): it should fit tightly into the hole with a minimum gap.
Restoring broken holes for door hinge screws

Restoring broken holes for door hinge screws

Restoring broken holes for door hinge screws

If the sizes match, use a children's watercolor brush to treat the surface inside the holes with wood glue and directly process all the dowels. The main thing is to remember to rinse the brush with warm water before the glue dries.
Restoring broken holes for door hinge screws

Restoring broken holes for door hinge screws

We insert the dowel as far as finger strength allows, and then lightly tap it with a hammer to hammer it in flush. Remove excess glue with a damp sponge, after which you need to wait for it to dry. We will reschedule further assembly for the next day.
Restoring broken holes for door hinge screws

Final assembly


After the glue has dried, attach the loop and mark the center of the seat with a pencil or awl. Use a thin drill to make a hole to the depth of the screw. In this case, you need to make sure that it will be less than the thickness of the screw, otherwise everything will have to be repeated again. Next, we place the door against the hinge and use a screwdriver to tighten the screws without excessive force.
Restoring broken holes for door hinge screws

Restoring broken holes for door hinge screws

Restoring broken holes for door hinge screws

Restoring broken holes for door hinge screws

Restoring broken holes for door hinge screws

Restoring broken holes for door hinge screws

Results of the work


After this procedure, the door will last for a long time, even if the children ride on it again. But now you know what to do, so you shouldn’t scold them too harshly.
come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
5+two=
Comments (8)
  1. Guest Valery
    #1 Guest Valery Guests 16 February 2019 18:32
    3
    As old as time!
  2. Guest Sasha
    #2 Guest Sasha Guests February 17, 2019 11:48
    3
    Cheap, reliable and practical. Thanks for the idea.
  3. Russian Vladimir
    #3 Russian Vladimir Guests February 18, 2019 07:42
    1
    I installed the door with epoxy, without any dowels, everything holds up perfectly. no need to worry too much.
  4. Peter
    #4 Peter Guests 18 February 2019 14:22
    2
    If the door frame beam cracks when driving in the dowels, you will have to replace the entire door
  5. Guest Alexander
    #5 Guest Alexander Guests 20 February 2019 21:19
    2
    Cold welding and you will be happy.
  6. Gregory
    #6 Gregory Guests February 21, 2019 06:09
    2
    What for are such difficulties, you stick in a couple of matches and that’s it. If there is a decent amount of force on the screw, then you can coat it with PVA.

Crafts - Do it yourself, step-by-step master classes | Page 21

5 effective ways to remove tape marks on any surface

Linoleum mouse pads | Do it yourself

Recipe for delicious lagman | Do it yourself

«Do it yourself - with your own hands» - a site of interesting homemade products made from scrap materials and items at home. Step-by-step master classes with photos and descriptions, technologies, life hacks - everything a real master or just a craftsman needs for needlework. Crafts of any complexity, a large selection of directions and ideas for creativity.

We recommend reading

Washing machine error codes