For it you will need:
1. Old printer.
2. 4 cooler from computer .
3. Power supply .
4. Insulation tape .
5. Bottle with ice. (We put a plastic bottle of water in the freezer, and after 5-10 hours we get a bottle of ice.)
6. Soldering iron. In principle, you can do without it.
AND So, the printer already includes what I need:
1. Power supply 220V~24V
2. The printer body itself.
3. Compartment for collecting condensed water
Step 1:
Disassemble the whole printer to hell!
Step 2:
Take wire and fasten coolers 2 each!
Step 3:
Tie and solder wires coolers 2 each
sequentially!
Step 4:
Attach them to the body like a thread!
Step 5:
Determine with a tester + And - block
power supply and connect pairs coolers parallel!
Step 6:
You can add button ON/OFF
Step 7:
This is step 0, put the bottle in the freezer!
Preferably 2 shifts!
Step 8:
Now we put it all together and launch!
Step 9:
Place the frozen bottle in the center of the printer!
Step 10:
We lie down on the sofa, put the air conditioner on top and
Enjoy the effect!
LET'S HAPPY THE COLD!
Well, here are my photos of a homemade air conditioner!
