DIY do it yourself
Master classes, instructions, useful tips, recipes.
» » »How to drill the puck smoothly
How to drill the puck smoothly

Those who were engaged in plumbing, various repairs of cars and motorbikes would surely find themselves in a similar situation when it was necessary to drill the washer evenly to the desired diameter. It would seem, take it and drill it, what's the problem? But not everything is as simple as it might seem at first glance.
If the washer is narrow or made of thin metal, then hold it, hold it somewhere just does not work out.
How to drill the puck smoothly

If you hold her in a vise, then most likely she will remember. And if you hold, say, with pliers, then the hole will not be even, since the washer will jump when drilling.

We drill the puck exactly with our own hands


I will use the bench drill. Do everything you need on a wooden board. Without starting the rotation, lower the drill close to the washer, thereby smoothly centering it.
How to drill the puck smoothly

Gently raise the drill without moving the washers. We put a wooden block on top and press it with a clamp. Then we start the machine and drill a bar with a sandwich with a washer and a lower plank.
How to drill the puck smoothly

We remove the bar. Tuck the puck as it was pressed into a tree.
How to drill the puck smoothly

In such a simple way, you can squander the puck smoothly and accurately without unnecessary effort.
How to drill the puck smoothly

If necessary, you can grind irregularities and burrs with a file.
How to drill the puck smoothly

How to squander the puck with a conventional drill?


We take a drill with which we will bore the puck. We drill a through hole in the bar in advance. Then put the washer on a wooden surface. We put a bar on top, adjusting the holes in the bar and in the washer by eye. Clamp with clamps.
How to drill the puck smoothly

We drill with a conventional drill or screwdriver.
Such tricks are very helpful in life, especially to those who own them.

Watch the video


come back
Comments (11)
  1. Anton
    #1 Anton Guests July 10, 2018 10:56
    0
    It is foolish to drill the puck, since it is much easier to stretch it, for example, by expanding the core.
    1. Guest Nikolay
      #2 Guest Nikolay Guests July 10, 2018 19:51
      0
      And it will become conical, when you try to align, the inner hole will narrow.
    2. Max
      #3 Max Guests July 11, 2018 01:34
      1
      With a core ... This is if you have a small puck and there is a core. But most have iron dowels and many different drills instead of the core, and more often it was necessary to expand large washers.
  2. Guest Andrey
    #4 Guest Andrey Guests July 17, 2018 20:35
    0
    There's something about it. But the collective farm!
  3. Boris
    #5 Boris Guests July 19, 2018 06:21
    1
    You DRILLED the puck, and SAW a file. Sharpen the turner!
    1. guest
      #6 guest Guests July 21, 2018 15:40
      2
      they saw with a saw and file with a file
  4. Dmitry
    #7 Dmitry Guests July 20, 2018 04:58
    1
    I drill the puck after first securing it with three screws to the board.
  5. Guest Michael
    #8 Guest Michael Guests July 25, 2018 14:28
    1
    easiest to drill with a step drill
  6. Alexander Nikolaevich
    #9 Alexander Nikolaevich Guests July 27, 2018 13:01
    3
    Advice on the case. A trifle, but useful! A comment is empty chatter!
    1. George
      #10 George Guests August 5, 2018 13:23
      0
      Myanagery kommentyat would be silent better would seem more clever ....
  7. Guest Vlad
    #11 Guest Vlad Guests March 29, 2019 16:25
    0
    only with the thought that you need to drill the puck already adrenaline rises in the blood, oh and this is a crap))))

Read also

Error codes for washing machines