DIY do it yourself
Master classes, instructions, useful tips, recipes.
» »Tool holders
Holders that are very easy to do for yourself make life very cool. Hanged at various levels, above the desktop, the entire tool is always at arm's length. The search takes a minimum of time and effort.
It seems to me that every craftsman or craftsman should have such a storage design for the right tool.
Tool holders

Making tool holders and organizing a workplace


3D model of the future workplace. Of course, it is not necessary to do it, but I love accuracy in everything.
Tool holders

Two identical holders for keys, screwdrivers, files, etc.
Tool holders

I laid out the tool in a ruler to figure out what the distance between the cells for the tool is.
Tool holders

I took the distance with a margin. Then I drew the rail into squares - these will be just the cells under the tool.
Tool holders

Tool holders

Then I measured the outer diameter of each tool, I added one millimeter to the distance so that everything would fit into its nests without problems.
Tool holders

Tool holders

I drilled the necessary holes deep in the middle of the rail.
Tool holders

That is, the thickness of the tree I had was 20 mm, and the depth of the non-through hole was 10 mm, respectively.
Tool holders

Now measure the inner diameter of each tool and add half a millimeter.
Tool holders

Tool holders

We drill internal through holes.
Tool holders

I turned the board over and drew two lines for each hole.
Tool holders

Tool holders

Adjust the blade height.
Tool holders

Carefully make cuts.
Tool holders

Tool holders

Tool holders

Tool holders

Then we grind all sides so that everything is smooth.
Tool holders

Internal planes can be sanded with soft sandpaper.
Tool holders

In order for the tools to enter easily, I made the grooves a little wider.
Tool holders

It's time to varnish with the color of the stain.
Tool holders

We give a day to dry.
Tool holders

Then we install and arrange everything according to a pre-designed template.
Tool holders

Tool holders

And the mess is turning into order!
Tool holders

Tool holders

Tool holders

Tool holders

Tool holders

Holders for squares.
Tool holders

Tool holders

Tool holders

Tool holders

Tool holders

Stand for drill set.
Tool holders

Tool holders

Tool holders

Tool holders

Hole saw holder.
Tool holders

Tool holders

Tool holders

Tool holders

Tool holders

They are made this way: a hole is drilled at an angle of 45 degrees and a round rail is inserted.
Other various holders.
Tool holders

Tool holders

Tool holders

As a result, we got such a beauty that only a real master can appreciate.
Tool holders

Thanks for reading and I hope you enjoyed it!

Watch the video


See the video for detailed instructions.
come back
Comments (4)
  1. Guest Igor
    #1 Guest Igor Guests July 26, 2018 19:32
    0
    Ravings of a madman. I would have hired a research institute to develop its devices. An ordinary amateur and the third part do not have such a tool. Why do you need what you use once every 5 years?
  2. Egor
    #2 Egor Guests October 14, 2018 18:00
    0
    All is correct. Although you rarely use some tools, look for them from this even longer! And so everything is in sight, and the place does not take.
  3. Guest Sergey
    #3 Guest Sergey Guests October 23, 2018 10:09 a.m.
    0
    it's good that you already have the whole instrument for the table, not everyone has it, but there was not enough money on the table ...
  4. Stainless steel
    #4 Stainless steel Visitors August 11, 2019 12:00
    0
    With love for order! But for example, I am not leaving the household store without having bought a new tool.

Read also

Error codes for washing machines