DIY do it yourself
Master classes, instructions, useful tips, recipes.
» »Folding work table made of PVC pipes
The workplace for any master is of particular importance. For some specialties, a desktop is simply necessary. But what to do when you often have to move and work at various facilities? You can’t drag a table from a workshop behind you, but a stranger’s worker of furniture may simply not be available. There is a clear solution, and today we will tell you about it.
Homemade products of this type are far from new. Furniture transformers were popular in the last century. And the masters, who emphasized such developments, sometimes brought them to incredible functionality. Homemade, presented today, is simple and at the same time very practical. This is a work table for small jobs with electrics, plumbing, etc. It is compact, lightweight, and takes up very little space. And transferring it from object to object will not be any difficulty at all. How to make it? Let's find out.
Folding table made of PVC pipes

Necessary materials and tools


Materials:
  • Inexpensive furniture board (grade 1-2);
  • PVC pipe, diameter - 1 inch or 25 mm;
  • PVC fittings (for pipe size): angle 90 ° for fastening the mixer and internal thread - 4 pcs, simple clip - 16 pcs, solder plugs - 8 pcs, sleeve with external thread and transition to the pipe - 4 pcs;
  • Iron carry handle;
  • A piece of furniture thin-walled pipe, diameter - 25 mm;
  • Bolts, nuts, washers, screws;
  • Varnish or paint, brush.

Instruments:
  • Plumbing soldering iron or “iron”;
  • Drill or screwdriver;
  • Jigsaw;
  • Sandpaper or grinder;
  • Drills, cross head;
  • Roulette, pencil, ruler, plate or compass for marking the radius of curvature of the countertop.

Folding table made of PVC pipes

Folding table made of PVC pipes

Folding table made of PVC pipes

Getting to the assembly of the desktop


Countertop Making


For the canvas of the countertop, the author chose a pine furniture panel. Plywood, OSB or chipboard are also suitable. Everyone can determine the size by the purpose of his activity.
Folding table made of PVC pipes

Advice!
It is worth paying attention to the placement of the legs under the table, the length of which is usually not less than 70-75 cm. They should not protrude due to the countertop, which means that its length must exceed this size.
We mark the countertops, starting with the placement of fastening PVC corners with thread. We distribute them at the four corners of the canvas, taking into account that they will be rounded. The author chose bolts as hardware for fasteners.
Folding table made of PVC pipes

Folding table made of PVC pipes

Folding table made of PVC pipes

The middle of the underframe will not be in demand, so we mark the position of the clips on it. There should be four on each side. The interval between them can be minimal, and the distance from both exposure lines should be less than the length of the legs.
Folding table made of PVC pipes

Folding table made of PVC pipes

Folding table made of PVC pipes

The edges of the countertops can be rounded with a jigsaw. You can use a plate or compass to mark the radius. Sandpaper or a grinder will help to process the sawn edges. We drill all the marked holes with a drill or a screwdriver.
Folding table made of PVC pipes

Folding table made of PVC pipes

Folding table made of PVC pipes

Folding table made of PVC pipes

Folding table made of PVC pipes

Wood is not a very durable material, therefore, it requires a protective coating. The author chose yacht varnish, which he applied with a brush on both planes of the countertop. So that there are no traces of the stands for decoration, it can be hung on any suitable hook.
Folding table made of PVC pipes

Folding table made of PVC pipes

We make legs and drawers for the table


For legs, the author chose a PVC pipe with a diameter of 25 mm. Its height must be calculated so that the sleeve and the plug fit in it.It is better to cut such a pipe with plumbing scissors, but a hacksaw for metal is also suitable. For stiffness, metal furniture suitable for size can be inserted inside the PVC pipe.
Folding table made of PVC pipes

Folding table made of PVC pipes

It's time to make a quality connection with a plumbing soldering iron or iron. We expose the appropriate sized sleeves, press them with a hex wrench and set the iron to warm up.
Next, insert the pipe and fitting into the opposite sleeves, heat them and tightly compress the heated ends, while aligning the connection. On each leg of four, a plug and a male thread coupling must be located.
Tsargi are intended for fastening the legs together. This design provides for their placement at any level of the legs. They are also soldered with an iron, and represent a piece of pipe with two plugs into which clips are screwed (photo). The author made only two of them, although the number may be large.
Folding table made of PVC pipes

Folding table made of PVC pipes

Folding table made of PVC pipes

Folding table made of PVC pipes

Folding table made of PVC pipes

Folding table made of PVC pipes

Folding table made of PVC pipes

Folding table made of PVC pipes

Folding table made of PVC pipes

Folding table made of PVC pipes

We collect table elements


The tabletop has dried, now you need to install the corners for the legs. Fasten them to the bolts, affixing washers. The connection can be tightened using a ratchet wrench with the appropriate nozzle.
To fasten them together, we put the remains of the furniture pipe between them, tightly holding them between the fixed corners.
Folding table made of PVC pipes

Folding table made of PVC pipes

Folding table made of PVC pipes

Folding table made of PVC pipes

Folding table made of PVC pipes

Folding table made of PVC pipes

Folding table made of PVC pipes

With one of the longitudinal sides we fasten the handle for carrying our table. This can be done on self-tapping screws.
Folding table made of PVC pipes

Folding table made of PVC pipes

Clips for storing legs are also attracted to the bolts. To do this, they have provided mounting holes for the nut. On the side we place several additional clips for storing the tsar.
Folding table made of PVC pipes

Folding table made of PVC pipes

The work table is ready, and now you can try to screw the legs into the corners, and fix the clips on the clips.
Folding table made of PVC pipes

Folding table made of PVC pipes

Folding table made of PVC pipes

Folding table made of PVC pipes

Folding table made of PVC pipes

Such a work table can be a real help for a master who needs his own workplace at the facility. You can transport it in any car, and the cost of parts will not burden the budget even for a beginner craftsman.
Folding table made of PVC pipes

Watch the video


come back
Comments (3)
  1. Max
    #1 Max Guests March 7, 2018 06:38
    3
    One manual transmission (combined polypropylene coupling) costs 100-150 rubles, there are 8. There are plus pp pipes, plus a steel pipe, furniture panel at least 1,000 rubles. Not profitable. If, of course, all these details and spare parts are left from work, then of course the norms. In general, a cool thing happened.
    1. popvovka
      #2 popvovka Visitors March 7, 2018 23:20
      1
      I made a folding table from an old cabinet, it came out for nothing)
      1. popvovka
        #3 popvovka Visitors March 7, 2018 23:21
        0
        More precisely this.
        https://washerhouse.com/3/en/3708-otkidnoy-stol.html

Read also

Error codes for washing machines