home » Electronics » DIY electronics »Programmer for MK

Programmer for MK

May 24, 2011 Electronics / DIY electronics 93 048 17

This programmer is one of the simplest and most common. It contains a minimum of detail and is easy to repeat:

To build, we need:

If there is no plug to the COM port, you can cut off the joystick from the shogi:

Making a circuit board

Parts Location:

So, our board is ready, now we solder the details. First jumpers, and then the details:

Here, all the details are already soldered and the MK PIC16F628A is inserted

The final stage: solder our COM-wire. But before you solder you have to ring

Unused wires should be cut to avoid shorting.

come back

Similar workshops

Solder aluminum

Master LED backlight

Stereo FM transmitter from MP3 player

Doorbell doorbell

Chilled fork

LED cube 3x3x3 not programmable

Joystick for computer from the keyboard

Making an eternal light bulb

A selection of simple and effective schemes.

Comments (17)

#1 STALKER Guests May 25, 2011 06:42
1

Would write what you need!
otherwise I won’t realize what’s in the picture there !!!
- To answer
#2 [) eNiS Guests May 25, 2011 10:06
1

In the sense of? Details? They are signed in the scheme
- To answer
#3 Endy Guests May 28, 2011 13:35
1

I understand that you stupidly insert mikra into the board? For programmers, the best use of pads for chips
- To answer
#4 feelloff Guests May 28, 2011 13:55
1

Well, did you assemble the programmer and what to do next ?!
- To answer
#5 [) eNiS Guests May 28, 2011 19:52
1

And then I collect more hours)) more precisely the details for them, it remains to find indicators)
- To answer
#6 [) eNiS Guests May 28, 2011 19:55
1

Not to the board, but to the socket. More precisely, I do not have a socket, but something like that. My lost socket had to be done differently, but my option is no worse than with the socket)))
- To answer
#7 Endy Guests May 29, 2011 13:26
1

I would also collect something on microns, but with us they are an expensive infection
- To answer
#8 [) eNiS Guests June 2, 2011 15:58
1

I assembled the Proger, but I can’t flash it (((
- To answer
#9 [) eNiS Guests June 10, 2011 21:09
1

Connect to the port and check, I personally do not see the program (((
- To answer
#10 zone Guests December 8, 2011 21:30
1

In short, this circuit is working, otherwise this programmer is very necessary.
- To answer
#11 Sergey9146 Guests December 8, 2011 10:25 p.m.
1

All cool Denis you have probably filled the floor of the site! Continue in the same spirit of good luck to you!
- To answer
#12 Babai Guests July 22, 2012 15:30
1

Pic mk means he can sew, and AVR ??
- To answer
#13 belek Guests May 8, 2013 19:25
1

(x3 x1 x2) in the circuit, what is it ??
- To answer
#14 leonid Guests August 16, 2013 18:04
1

Can the guys see the diagram poorly, can it be made clearer and larger? Everything else is in excellent quality.
- To answer
#15 this is Guests August 31, 2013 00:31
1

the impression is that something is missing on the diagram!
or they need to flash trousers?
- To answer
#16 Triger 2009 Guests March 25, 2015 21:19
1

: winked: Assembled but doesn’t want to work, where to watch the scheme!
- To answer
#17 Vasya Guests January 17, 2019 3:58 p.m.
0

What program do I need to use to flash through this programmer?
- To answer