- - satin ribbon (2.5 cm) green - 5-6 m,
- - silver tape (1 cm) - 1-2 m,
- - rhinestones
- - glue,
- - scissors
- - cardboard
- - a bottle of champagne.
So, first of all, I make a cardboard base for the festive decor, for this I cut a rectangle from cardboard in size 297x130 mm.
I attach the blank to the bottle, glue the edges. I fix the clerical rubber band.
I draw the upper part adjacent to the neck on paper, first I draw a 27x13 cm rectangle and divide it in half (other sizes are shown in the photo).
I cut, make cuts so that our workpiece can be bent and glued securely.
I also apply the upper part to the neck, glue the edges.
Next, I connect both blanks with glue.
Then cut the satin ribbon into strips of 10 cm.
I bend the segments in half, coat with glue, glue for 1.5-2 cm from the bottom of the bottle. I fix a number of clerical gum.
I form the next 3 rows in a similar way.
I turn to the design of the neck of the bottle, for this I coat the upper part with glue, apply the tape, cut off the excess.
I decorate the upper part of the workpiece to the already made “skirt”.
Here's a removable Christmas tree I got.
Of silver tape and rhinestones decor. You can invent it yourself.
To make a bow, cut off 15-20 cm of a green satin ribbon, press each edge to the center, sew it together.
I sew silver on the top of the green ribbon.
Next, from a small segment, I perform a jumper for our bow.
Decorate with a silver ribbon. I repeat, the decor can be any, at your discretion.
For tails, measure out about 20-25 cm, I also press the edges of the tape to the center and sew.
I bend at an angle and flash it again.
Again came the turn of the silver ribbon.
So, I sew the bow and ponytails together. Here is a decoration for the Christmas tree I did.
I attach an elegant bow to the junction of the "magnificent skirt" and the upper part.
Here is such a New Year’s beauty I got.
I remind you that you can use this decor next year.
