How to remove a dent on a car?
So, let's begin. We inspect the dent. We need to find the middle of this dent. Once this is done, take the unnecessary valve (if you don’t have one, ask your neighbor) and degrease it with alcohol or gasoline.
Then apply hot glue to the valve head. If you only have glue without a gun, then heat the valve with a gas burner and spread the glue.
Glue the valve into the middle of the dent. We hold it with our hands for a few seconds, waiting for the glue to set. Let go and wait another 3-5 minutes until it cools completely and hardens.
Next, so that the valve axis does not slip out of your hands, we take it with a rag or mittens. And with force we pull in the opposite direction from the dent. Rather, we even pull.Since the dent has internal tension, it tends to straighten out on its own, but the strength of the tension in the steel is not enough, and in this way we help the dent return to its normal state and relieve this tension that has arisen.
How to remove hot glue?
In general, the dent has straightened out. Now all that remains is to remove the valve, if it has not come off on its own, and the adhesive gasket.
If the paint on the dent site is factory, take acetone, spray it on the glued area and carefully remove everything. If the place has already been painted, it is better to take alcohol.
Here's a simple way to quickly straighten a dent on a car with your own hands!
