DIY do it yourself
Master classes, instructions, useful tips, recipes.
» » » »Flower from the remains of the tape
Each needlewoman is faced with a problem, a few centimeters are left, and it is a pity to throw out. But they also have an application. Even from the small remnants of ribbons, you can make a beautiful hair clip with a flower.
To create such a flower you will need:
- squares of satin ribbons of five different shades of blue, with sides of 5 cm.
- scissors.
- The cabochon is light blue.
- lighter.
- hairpin “click-clack”.
- stamens with blue color of heads.
- green satin ribbon 25 mm wide.

Work sequence.
First you need to put in front of you all 5 prepared squares from different shades of blue.
Leftover Ribbon Flower

You need to make a separate petal from each one. First you take one square and just bend it diagonally.
Leftover Ribbon Flower

Slices of the resulting triangular part must be collected with folds, squeezing with your fingers.
Leftover Ribbon Flower

The edges of the part are slightly curved, so you need to cut them with scissors, aligning the cut.
Leftover Ribbon Flower

Then, with the fire of the lighter, the edges of the folds of the tape should be strongly scorched so that they weld together and retain their shape.
Leftover Ribbon Flower

The result is a rounded petal for the future flower, the remaining 4 squares must be subjected to a similar treatment.
Leftover Ribbon Flower

Multi-colored blanks are made. Now you need to make the leaves. To do this, you need a green ribbon. From it, 2 segments of 4 cm will be required.
Leftover Ribbon Flower

The width of the segment must be doubled.
Leftover Ribbon Flower

The edge at the top should be cut at a slight slope.
Leftover Ribbon Flower

The inclined section should be immediately fused with fire and immediately squeeze the seam with your fingers so that the two layers of tape are fastened together.
Leftover Ribbon Flower

The result was a simple leaf, the second is done the same way.
Leftover Ribbon Flower

Now it's the turn of the blue stamens. They need to be glued in two.
Leftover Ribbon Flower

The united stamens must be glued in the center of the leaves, but so that they do not protrude much beyond the edge of the green ribbon.
Leftover Ribbon Flower

Now, from the prepared multi-colored petals, you should make a flower by connecting them in a circle.
Leftover Ribbon Flower

Two leaflets should be glued to the iridescent flower, to the wrong side, placing them at a small distance.
Leftover Ribbon Flower

On the bottom of the flower you need to attach the edge of the hairpin.
Leftover Ribbon Flower

It remains only to attach a light blue cabochon in the center of the flower.
Leftover Ribbon Flower

A multi-colored flower from the remains of ribbons is ready!
come back
Comments (1)
  1. Irinaalexa
    #1 Irinaalexa Guests August 7, 2017 10:16
    0
    Class! I'll try to make such hairpins for my daughter. In general, I really like such original jewelry - after all, no one else will have such hairpins. Thank !

Read also

Error codes for washing machines