Materials for work:
- Dense plain fabric - 1 meter with a width of 140 cm .;
- Stitch on synthetic winterizer - 1 meter with a width of 145 cm .;
- Application - 2 pcs.;
- Plain beige fabric - 0.5 x 0.5 m;
- Plain fabric of red color - 0.4 x 0.6 m;
- Sewing machine, threads, scissors.
Stages of the work:
The first stage: preparation of the basis.
Two types of fabric are taken for the base: a dense plain color (for thematic applications) and a stitch on a synthetic winterizer (so that these priests do not freeze). The front side in this master class is a bit already wrong.
From beige plain fabric we cut out two “priests”. It is on them that the brawlers will later land.
For a positive impact, we select thematic applications. Wafer bright colored fabrics are very suitable for them. We cut two plots.
In the center of the carpet we place the sun. To do this, draw a circle on a piece of red fabric.
We draw rays on its sides, inside - eyebrows, nose and mouth.
We place all the details on top of the main fabric, after having indented on the sides (for subsequent stitching with the wrong side): priests and thematic applications in different angles, the sun in the middle. Pins the parts to the base with pins.
The second stage: we sew "priests".
Sewing starts from the center (to avoid the formation of a bubble inside the “priests”). Embroider a straight line eight.
On the flip side, it looks like this.
We sew the edges of the pop with the line “zigzag”, making it as dense as possible.
In order for the fabric to not crumble on the applications, we make another circle “zigzag” with threads of a different color. The machine’s foot should move so that it captures part of the base fabric and half of the previous zigzag line.
The third stage: we sew themed applications.
In order to avoid correction of the pattern, we sew the white details of the applique with white stitches in a straight line.
On the edges of the picture we sew two seams with a “zigzag” thread of different colors.
The fourth stage: the application of the "sun".
We start the firmware from the center, carefully smoothing the fabric when turning the movement of the foot. We sew eyebrows, nose, mouth with even thread “zigzag” with even threads.
Carefully iron the embroidery on the back (using the steaming function).
We sew the circle of the sun with the threads of red color with a zigzag seam, iron it on the back side.
Yellow threads embroider rays.
We cut off the excess tissue, trying not to touch the seams on the rays.
We make the second line of black on the rays (capturing the cut edge and part of the previous line).
We revive a sunny smile with a tongue (stitching with “zagzag” with red threads).
Fifth stage: we connect the front and the wrong sides of the carpet.
After ironing all the application details, we fold the main fabric and the stitch with the sides facing inward. Stitch along the edge from three sides. We turn out.We fasten the fourth side with pins, previously bending the edges of the tissues inward.
Using a decorative line, we sew the carpet around the entire perimeter from the front side.
That's all! Such a positive solution to the conflict situation clearly will not go unnoticed by the little debaters and brawlers. It will cause interest, and, therefore, increase the chances of peace in the house.