Today I will tell you about my next homemade product. This is a hood with automatic control. No, of course I didn’t do the hood itself - I bought a ready-made one, but I organized the automatic switching on the basis of ready-made electronic modules.
The hood itself turns on and off when there is fire on the stove. The entire temperature on and off is very easy to configure, thereby you can choose any sensitivity, which is very convenient.
The control unit is assembled in a purchased case. The sensor is located in the middle of the exhaust grid to control heating. A 12 V power supply and a temperature regulator, which I configured to turn on the relay at a temperature above 29 degrees Celsius and off when the temperature drops below 28 degrees, are installed in the case. You can see the operation of the automatic hood in the view below. That's all. All links to purchase items below the video.
Thermostat - #
Power supply 12 V - #
The case as in the video - #
Block housing separately - #
Thank you for watching!
