We will need quite a bit of fabric, yellow fleece, blue, white, black and grey. We will sew overalls from blue, glasses from gray, slippers and gloves from black, and eyes from white. Filler - for the inside of the toy. Wire - we will insert it into the arms and legs so that they bend and take any shape, and an elastic band. But you can do without it. It's up to you. 2 buttons for eyes.
To start sewing, look for a pattern on the Internet.
We cut the pattern according to it and according to the dimensions indicated in the picture. Sew along all edges. This is what we got.
We make a cut at eye level so that all edges are sewn up. We fill the toy with filler.
From white fleece we cut two identical circles - eyes. Size approximately 5*5. We sew it on by hand, at the end we fill the eye with filler and sew it up. The result is voluminous eyes.
From yellow fleece we cut out exactly the same two eyes and draw on them as shown in the photo.
We cut out oval parts and sew them on top and bottom of the eye - these will be the eyelids.
Let's start sewing the hands. Draw a hand on the yellow fleece, as shown in the photo. Arm length 20 centimeters.
We need 4 parts.
We measure the same length of wire twice. We wrap the wire with a strip of padding polyester.
We put a hand on the resulting part. And sew it to the body.
We do the legs in the same way.
We get this Minion.
Now, using needles, we mark the location of the mouth. And we flash it.
Sew two buttons onto the eyes.
Now we need to dress our Minion. We sew gloves to the same dimensions as hands.
We sew slippers. To do this, cut out the sole - a small oval.
For the sock, cut out the details as in the photo, their length is equal to the length of the oval for the foot.
We cut two rectangles, the length is equal to the leg circumference (leg circumference).
We sew the oval part of the part up to the foot.
Now we make a small stitch on top of this stitched oval. This is done to make the sock round.
Sew the back seam and sew the sole with the rectangle.
The result is a slipper like this.
The toe of such a slipper can be filled with filler to make it voluminous.
Cut out the overalls. The width is equal to the width of the Minion, the length is equal to its length.
cut out the strips and sew them lengthwise - there will be straps for the overalls.
We sew them with buttons to the overalls.
All that remains is to cut out the glasses. We cut the glasses, the size is slightly larger than the size of the eyes.
You will need 2 parts. Cut a strip 2.5 centimeters wide, the length should be equal to the side of the glasses.
We will also need 2 small strips of the same width, but the length will be equal to the inside of the glasses.
Now we sew the strips one by one to the edges of the front of the glasses and to the inside.
We turn the workpiece inside out and fill it with filler. Sew it up. Sew on the elastic.
We put glasses on Minion. Ready.
