DIY do it yourself
Master classes, instructions, useful tips, recipes.
» » » »New country table from old boards
Summer is a time for summer holidays. And what kind of vacation without a feast? You can, of course, acquire a plastic table purchased at the supermarket, light, delicate. However, such a table, like any thing, also has drawbacks. For example, it can flutter from a gust of wind at the most inopportune moment. But everything is fixable if the country has old lumber. A do-it-yourself table looks more efficient and reliable, lasts longer, it will not burst due to temperature changes and will not crack under high load pressure. The cost of such a table is half an hour of time!

Materials for work:
• Old beam 10 x 15 in size - 4 heights of table legs;
• 40 mm thick board - 2 widths + 2 tabletop lengths;
• Edged board - 1 pc. 5 meters long;
• Nails 120 mm long - 16 pieces;
• Nails 40 mm long - 20 pieces;
• Saw, hammer, brush, paint.

Stages of the work:

The first stage: we form the basis.


We take an old window sill, a bar, a couple of thick boards. To give stability to the future table in this master class, a block and an old window sill were used. The window sill is comfortable with already cut notches. But it can easily be replaced with a bar and use only it.
do-it-yourself cottage table

On the windowsill, measure out 65 centimeters.
do-it-yourself cottage table

We saw off two parts, each of which is 65 centimeters long.
do-it-yourself cottage table

do-it-yourself cottage table

The legs of the future table are made of timber, on which we measure 60 centimeters.
do-it-yourself cottage table

We saw off two parts of the same length.
do-it-yourself cottage table

We install pieces of the windowsill - the basics at a small distance from each other. Having made a small indent from the edge of the base, on the sill of the windowsill we install a leg - a beam.
do-it-yourself cottage table

We drive into the leg - a bar along a nail (120 mm long) on ​​each side, connecting the joints of the leg with the parts of the window sill. We drive in the nails at an angle (obliquely).
do-it-yourself cottage table

On the opposite side we install the second leg - a beam, similarly connecting its joints with the parts of the windowsill with nails.
do-it-yourself cottage table

do-it-yourself cottage table

To strengthen the connection of the parts of the table, we turn the resulting design and hammer the nails in a straight line, fixing the junction of the legs - timber and base - windowsill.
do-it-yourself cottage table

The base of the table is ready.
do-it-yourself cottage table

Second stage: make a countertop.


We saw off two thick boards (genital), connect them to the top of the legs - bars. Nail 120 mm long, use 4 pieces.
do-it-yourself cottage table

To the unclosed sides of the legs - bars we fasten two thick boards. The length of the boards is equal to the length of the countertops (in this master class it is one meter). Fasten with nails 120 mm long, use 4 pieces.
do-it-yourself cottage table

do-it-yourself cottage table

For the front side of the countertop we use a smooth edged board.
do-it-yourself cottage table

We saw 5 segments 90 centimeters long.
do-it-yourself cottage table

do-it-yourself cottage table

We put the cutting of the edged board on top of the nailed meter pieces of a thick board (placing them across).
do-it-yourself cottage table

Nails 40 millimeters in length are beaten by cutting a cut board to two meter pieces of a thick board (hammering nails on both sides). We use 10 nails on each side of the countertop (20 pieces total: 2 nails in each plank on each side).
do-it-yourself cottage table

do-it-yourself cottage table

We cut off the protruding corner of the thick transverse boards (to which the front of the countertop is attached) under the countertop.
do-it-yourself cottage table

This is such a nice little table.
do-it-yourself cottage table

Stage three: working on the design.


So that the table would please us even in rainy weather, we paint it with paints of different colors.
do-it-yourself cottage table

So the wonderful table is ready. He will not be blown away by a gust of strong wind, he will not fall on his side if you put a five-liter pot with a barbecue on the very edge, and the legs do not crack under the weight of the guests dancing on it. Have a nice meal!
do-it-yourself cottage table
come back
Comments (3)
  1. Rififi
    #1 Rififi Guests 5 august 2016 14:10
    0
    A pretty little table turned out! Thank!
  2. princessira
    #2 princessira Guests August 21, 2017 12:29
    0
    Here you go! Now I want such a table! I will give your article to my husband and sons. Let them try. Moreover, all the materials are at hand. And already I will paint myself)
  3. master1959
    #3 master1959 Guests 28 august 2017 21:29
    1
    The edges should be slightly curved. So that the child does not hit.

Read also

Error codes for washing machines