DIY do it yourself
Master classes, instructions, useful tips, recipes.
» » » »Women's shirt with a zipper
Hello, dear visitors of the site. Today I can offer you an idea or just talk about how to sew a shirt without buttons on a zipper with a turn-down collar with my own hands. For its pattern, you can take a fabric that is poorly stretched or hardly stretched (for example, chintz). A shirt made from this fabric is suitable for socks in spring, summer and early fall. It will take about a week to make it, if sewn by hand. So it looks when trying on:
Women's shirt with a zipper

Women's shirt with a zipper

To sew such a shirt, you need the necessary materials, such as:
- Measuring tape;
- Pure paper for making samples;
- Pen-pencil;
- Fabric for a pattern (we have a simple chintz);
- Threads;
- A fastener - a lightning;
- Needles for stabbing;
- Sewing machine or needle for sewing.

Starting work with a pattern, you must first measure the dimensions of the future shirt with a special tape. But it is much easier to get this data when measuring the size of any other of the shirts or dresses in the waist, taken for the sample; this data will be the most accurate.
For example, we have the following data: shoulder length - 8.5 cm, neck length - 25 cm, waist circumference - 65 cm, chest circumference - 77 cm, length from shoulder to waist - 50 cm; arm length - 30 cm, arm elbow circumference - 17 cm. For these parameters, or data, we must make two samples of paper, one front and one back.
Women's shirt with a zipper

At the beginning of the work, we wanted to make a shirt with buttons, but there were no buttons, and later we decided that it would be better to make it with a zipper. If both samples are fastened together, then it is possible to more accurately calculate the position of the shoulders and sides so that these areas coincide in both samples.
Next, the resulting paper samples need to be pinned with special needles for stabbing to the fabric, and then cut out the samples from the fabric, leaving small areas at the edges for allowance (2 - 3 cm wide), so that it is more convenient for individual tissue samples to be sewn together .
The upper part (shoulder) of the sample on the front side of the shirt, we decided to cut and cut from the fabric two models according to this sample. (Because the neckline of our shirt is pointed, it will be a little inconvenient to make seams at the very bottom of this neckline (you will need extra fabric in order to sew on top)). If you sew two parts of such a pattern, right and left, and then put them together, then the finished shirt will look good:
Women's shirt with a zipper

Women's shirt with a zipper

Now we cut out the fabric from the back of the shirt. In order to be able to cut accurately, we decided to fold the fabric with a paper template in half. After that, having fastened them together, we cut it with small indents:
Women's shirt with a zipper

Now we need to make paper samples of the sleeves. First, we make drawings of samples that we need to cut and then use to make patterns:
Women's shirt with a zipper

Next, we sew the neckline on both samples of the front of the future shirt.
Having added two to three times the sections of the allowance, we fix them with needles for stabbing, and then make seams. You can use a sewing machine, or you can do the seams yourself - which will be more convenient:
Women's shirt with a zipper

Almost the same thing we need to do with a neckline at the back of a future shirt:
Women's shirt with a zipper

Now we sew together the two sides of the front of the shirt, also fastening them with sewing needles, and on one of the sides we need to sew a zipper:
Women's shirt with a zipper

We still have a little fabric, and therefore we sew each sleeve in two parts and shorten the sleeves (initially we expected to make them in full length). Having folded the allowance sections several times on both sides, we first sew the sides of the sleeves, and then the cuffs.At the shoulders you need to leave a small portion of the allowance in order to sew the finished sleeves to the shirt:
Women's shirt with a zipper

Next, we seam together the front and back of the future shirt, and we decided to start sewing from the shoulders.
Noticing that one shoulder is slightly higher than the other, we decided to slightly dissolve the allowance area at the short shoulder, lengthening it in this way and aligning both shoulders. After that, it will be possible to connect the sides to the seams and sew the finished sleeves:
Women's shirt with a zipper

So an almost finished shirt looks behind:
Women's shirt with a zipper

Now we just have to fold the allowance sections in the lower side of the pattern and sew them:
Women's shirt with a zipper

Now we turn the resulting shirt from the inside out:
Women's shirt with a zipper

After that, the shirt can be considered finished: it looks good without a collar when trying on, but if you want, you can make a collar from the remaining fabric. We decided to make it of four parts - scraps:
Women's shirt with a zipper

Having folded at each part of the collar several times on both sides of the fold so that the threads of the fabric do not crumble outside, you must first carefully sew the seams on the side of the future collar, and then sew the resulting collar on the shirt.
Women's shirt with a zipper

When sewing on the collar, we will need to make two seams: the first seam will have to connect the collar with the neckline at the edges, and the second will connect the lower edges of the folded allowance section with the neckline fabric.
We made such sewing patterns, according to which our work was done:
Women's shirt with a zipper

Women's shirt with a zipper

We did all the seams without a machine, manually, and we did not even need a needle for stabbing. This work looked like this:
Women's shirt with a zipper

Thus, we need to make and sew all the remaining parts of the collar:
Women's shirt with a zipper

If the ends of the already sewn-on collar are slightly raised in some places and open up to the seams, then you can hem them to the fabric, after which the shirt will be completely ready.
This is what our shirt looks like:
Women's shirt with a zipper

If you try it on, it will look like this:
Women's shirt with a zipper

Women's shirt with a zipper

After that, everything - our shirt without buttons with a zipper is completely ready.
Comments (0)

Read also

Error codes for washing machines