Do it yourself
Life hacks, master classes, useful tips, recipes.
home » Different » Crafts » On February 14 » Volumetric coffee heart in a pot
Giving perfume or a book for Valentine's Day is a little stupid, because this is a holiday with a dramatic story telling about true, sincere love. Of course, present must be unusual.
Undoubtedly, you can find something suitable at retail outlets, but it is much more pleasant to make a gift for a loved one with your own hands. Then why not give a coffee heart? Making will take time, effort and patience, but the end result will be worth it. And the happy face of your loved one will only prove to you that your efforts were not in vain.

So, we will need:
1) a sheet of white paper;
2) pencil;
3) scissors;
4) stationery knife;
5) brown fabric;
6) cardboard;
7) hot glue gun;
8) hot glue (several rods);
9) transparent super glue;
10) small pot;
11) coffee beans;
12) a small stick - if it’s crooked, it’s even more interesting;
13) several strips of foam rubber;
14) gypsum or cement.
Volumetric coffee heart in a pot

Step 1. Cut out a heart of the required size from a white sheet.
Volumetric coffee heart in a pot

Step 2. We apply the template to the cardboard and trace it with a pencil.
Volumetric coffee heart in a pot

Volumetric coffee heart in a pot

Step 3. Using a stationery knife, cut out the heart along the contour.
Volumetric coffee heart in a pot

Step 4. Now carefully cut out the inside.Note: you need to cut it slowly, since cardboard is difficult to cut.
Volumetric coffee heart in a pot

Step 5. Heat the hot glue gun and coat the cardboard template piece by piece.
Volumetric coffee heart in a pot

Step 6. Immediately glue the foam rubber, but leave the tip unglued. Note: The glue cools quickly, so you need to finish the job in a short time.
Volumetric coffee heart in a pot

Volumetric coffee heart in a pot

Step 7. Take the chosen stick and glue it to the tip of the heart, and then seal the foam.
Volumetric coffee heart in a pot

Step 8. For reliability, we tie the entire structure with rope. But if you feel that the stick is held securely, then this is not necessary.
Volumetric coffee heart in a pot

Step 9. Cut 2 strips of brown fabric and wrap the entire heart, covering it with super glue.
Volumetric coffee heart in a pot

Volumetric coffee heart in a pot

Step 10. It's time for coffee: take the beans and use a glue gun to glue the outer and inner contours.
Volumetric coffee heart in a pot

Step 11. Then we glue the entire front part, and then the back. Note: when the entire heart is pasted over, we also cover the empty spaces with coffee beans to create a second layer.
Volumetric coffee heart in a pot

Step 12. When our heart is completely ready, we put it aside for a while and prepare the pot. For this we need the pot itself and gypsum (cement).
Volumetric coffee heart in a pot

Step 13. Pour a full pot of gypsum and dilute it with cold water. Mix everything until smooth.
Volumetric coffee heart in a pot

Volumetric coffee heart in a pot

Step 14. We insert the heart into the pot in the position we need and hold it for about five minutes so that the plaster hardens on the trunk.
Volumetric coffee heart in a pot

Step 15. Decorate the pot and heart. I used floral hay and red sisal, but you can use whatever you like. Unleash your imagination!
Volumetric coffee heart in a pot

Our coffee heart is ready. When you give a gift, do not forget to add the three main words of this holiday, because they set its atmosphere.
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
3+three=
Comments (0)

How to modify a post-screw jack into a universal lift for any car

Wedding Envelopes for Money Gifts | Do it yourself

Pink cat Murzik | Do it yourself

How to use a piece of paper to perfectly mark the end of a pipe for a 45 degree insert

«Do it yourself - with your own hands» - a site of interesting homemade products made from scrap materials and items at home. Step-by-step master classes with photos and descriptions, technologies, life hacks - everything a real master or just a craftsman needs for needlework. Crafts of any complexity, a large selection of directions and ideas for creativity.

We recommend reading

Washing machine error codes