DIY do it yourself
Master classes, instructions, useful tips, recipes.
» » » »New Year's boot
New Years is soon! A time of miracles, beauty and fulfillment of desires! Everyone is trying to decorate his house in his own way! Someone puts a Christmas tree, someone hangs garlands, and someone hangs decorative boots on the fireplace. One of these boots today we sew. For this we need fabric:
- Chintz, I took a white small blue flower;
- pink chintz or fleece, for the face of Santa Claus;
- fleece red;
- fleece white;
- fleece yellow;
- the fleece is blue, but since I do not have it, I took the blue velsoft;
- flannel in flower;
- pink satin thin ribbon;
- synthetic winterizer;
- filler;
- grid;
- and a pair of beads.
First of all, we draw the outline of our boot on paper.
Christmas boot

We draw the location of the parts on it, draw Santa Claus!
Christmas boot

Now we will transfer all the details to plain paper and cut it out. The result was a pattern of decor details.
Christmas boot

We begin to cut the details. From white fleece we cut a mustache - 2 pieces.
Christmas boot

Just cut the beard of Santa Claus.
Christmas boot

We take pink chintz or fleece, we cut a face and a nose.
Christmas boot

We take a flannel and cut a sock, 2 parts.
Christmas boot

From red fleece we cut a cap and two upper decorative strips.
Christmas boot

For the bird, we cut from the yellow fleece base and blue velsoft wing, a small red beak.
Christmas boot

We cut boots from chintz into a small flower, 4 details are required.
Christmas boot

The same parts are cut from synthetic winterizer - 2 pieces.
Christmas boot

First we make a bird, for this we sew the yellow details of the base, leaving the opening, do not forget to attach a small beak.
Christmas boot

We turn out.
Christmas boot

We fill it with filler and sew it up.
Christmas boot

Christmas boot

In the same way we sew and stuff the wing.
Christmas boot

Christmas boot

Now we take a bead, I took a red one and sew a wing with it to the base of the bird.
Christmas boot

Again we take a bead, but of a different color. it will be an eye.
Christmas boot

And sew it in the eye area.
Christmas boot

The bird is ready!
Now we sew a mustache
Christmas boot

Christmas boot

We twist, stuff and sew.
Christmas boot

Sew the synthetic winterizer to the main part of the boot
Christmas boot

Sew on the beard of Santa Claus.
Christmas boot

And a sock made of flannel.
Christmas boot

Sew on the face of pink chintz or fleece. If you take chintz, then the edges should be folded so as not to open.
Christmas boot

Now it's time for the spout. We take a circle, on the edge we flash it on a typewriter, but with a weak thread tension. We tighten, fill the empty space with filler and sew to the face.
Christmas boot

We also sew a mustache here.
Christmas boot

We take two black beads of the same size - these will be the eyes, sew on.
Christmas boot

We take a strip of mesh 2.5 centimeters wide, stitch it in the middle with a seam with a weak thread tension.
Christmas boot

Pull the thread, you get these ruffles.
Christmas boot

Sew it next to the cap, it will be the bellows bellows.
Christmas boot

Let’s leave it like that for now, but we’ll sew the cap itself.
Christmas boot

Now you can fill the bellows at the cap.
Christmas boot

Now we take the tape and sew it on the border of fabrics, beard and sock.
Christmas boot

And on the border of the fabrics from above.
Christmas boot

Sew the finished bird manually.
Christmas boot

We take the second part from the boot, sew on it a synthetic winterizer, a toe of flannel and a red strip on top.
Christmas boot

Fold the parts with the front side inwards and flash them.
Christmas boot

In the same way, we sew two more parts, this will be the inside of the boot.
We sew the inner and outer part, turn it out. Do not forget to attach a small loop.
Christmas boot

We sew in the opening through which we turned out and straightened everything.
We make a finishing line on the top of the boot.
Christmas boot

Now we cut small rectangles 3 * 6 in size from the grid, group them and sew them in the middle, forming a bow, sew them to the cap. We color the cheeks of Santa Claus and the boot is ready!
Christmas boot
Comments (0)

Read also

Error codes for washing machines