DIY do it yourself
Master classes, instructions, useful tips, recipes.
» » »Vertical shelf for flowers
My son, pretty guilty in front of my mother, decided thus to "suck" at her, to beg forgiveness. And the way I chose for this, it seems to me, is not quite ordinary. After all, children at his age make something from plasticine, I draw a picture or at worst - they make something from paper. Therefore, by his insistent desire to make a shelf for violets, and even vertical, he made it clear: I definitely could not get out. After all, it was I who was supposed to be the assistant mentor. So what we started.
So, to make this vertical shelf for flowers, you will need:
• screwdriver or drill,
vertical shelf for flowers

• confirmation drill,
vertical shelf for flowers

• hex and cross bits, as well as a magnetic extension cord for quick replacement,
vertical shelf for flowers

• a small hammer or mallet,
vertical shelf for flowers

• 12 notch (although this is not necessary, but more on that below),
vertical shelf for flowers

• 42 self-tapping screws 40 mm long with countersunk head,
vertical shelf for flowers

• and four - with a large decorative.
vertical shelf for flowers

• In addition, 14 confirmations are needed,
vertical shelf for flowers

• awl (where without it),
vertical shelf for flowers

• four narrow canopies,
vertical shelf for flowers

• nine iron corners,
vertical shelf for flowers

• carpentry knife,
vertical shelf for flowers

• a piece of sandpaper on a bar,
vertical shelf for flowers

• iron and a small rag. Any iron, even the one that you regularly use to iron clothes (do not ruin it anyway), and a rag - so as not to get burned when you stick the hot edge.
vertical shelf for flowers

• By the way an edge. Choose it in the color of the chipboard, or vice versa, make it contrast, decide for yourself,
vertical shelf for flowers

• and the pieces of the plate themselves do not need to be ordered in cutting from a whole sheet. The same parts of 100 by 130 mm were made to me from the remnants in the workshop, where they saw large sheets “for thanks”, expressed in a bottle of cold sparkling water. They needed 15 pieces, although this entirely depends on the size of the window on which you will hang our vertical shelf for flowers.
vertical shelf for flowers

Now we paste over the details with the edge. There is nothing wise here, so we apply a piece, warm it with a hot iron for a few seconds, and press and smooth it with a rag (be careful not to burn yourself).
vertical shelf for flowers

Now we cut off the surplus and sandpaper pass "for fidelity." And so - all the details.
vertical shelf for flowers

With one confirm, we fasten two of them,
vertical shelf for flowers

and we get seven identical "letters G" plus one more detail.
vertical shelf for flowers

And from the remnants of the edge we chop into the notch circles to seal the heads of confirmations. Just in the store where I bought it, there were no circles of this color. Although if you are more lucky than me, this stage can simply be omitted by buying ready-made ones.
vertical shelf for flowers

Now we collect the scattered parts in a single vertical shelf for flowers. The children immediately called her the "caterpillar."
vertical shelf for flowers

It needs to be fixed. But not just hang (then we would mount the awnings "in the pot"), and pull so that it, if possible,
vertical shelf for flowers

hung as tightly as possible. And it is ready.
vertical shelf for flowers

Now arrange the flowers.
vertical shelf for flowers

That's all the wisdom, the vertical shelf for flowers is not just assembled, but hanging and pleasing to the eye. What more could you want from her? Probably nothing.
Comments (1)
  1. linkaksu
    #1 linkaksu Guests August 22, 2017 12:27
    0
    interesting idea! Itself, however, is unlikely to translate into reality. I’ll show my husband, let him direct energy into a peaceful direction)) Such a bookcase wherever you can hang

Read also

Error codes for washing machines