It is necessary to prepare:
1. White cardboard;
2. Three different types of cardboard or thick red paper or with a pattern where there are shades of red;
3. A red ribbon with polka dots (you can use monophonic, striped and other options);
4. Openwork white tape about 1 cm wide (self-adhesive or fabric);
5. The button is red;
6. Thin lace;
7. Foamed double-sided tape;
8. Rhinestones of red color;
9. Glue, a simple pencil, tweezers, scissors.
From a white cardboard we cut a 21x21 cm rectangle, bend it in half and get a ready-made base for a postcard. Its dimensions will be 21x10.5 cm.
We take different types of paper or cardboard with a red pattern and cut out a heart from each. You should get three different-sized hearts - from the largest to the smallest.
We cut two pieces of openwork tape 10.5 cm long. Glue at the bottom of the base at a distance of 2-3 mm, as in the photo.
Cut off 10.5 cm of red ribbon with polka dots, glue in the middle between the strips of lace tape.
We take about 10 cm of lace, populate the button, as in the photo.
We tie a knot, then a bow.
Fasten the button with a bow on the right to the ribbon.
On the reverse side of previously cut hearts, we fasten the double-sided foam tape and attach the largest heart to the base of the card from above to the left.
In the same way we attach the second heart a little lower to the right.
On the foam tape we fasten the smallest heart below to the left.
Using tweezers we fix red rhinestones along the contour of hearts.
Do-it-yourself postcard is very beautiful, bright and incredibly easy to carry out!
