For its manufacture it is necessary:
- glue gun.
- Satin ribbons of crimson and white.
- silver and pink sparkles.
- beads of raspberry and silver tint.
- sewing thread with a needle.
- scissors.
- hair clip 7 cm long.
- lighter.
Making a hair clip.
For this decoration, ribbons with a width of 5 cm are necessary. Of them, identical parts in the form of squares with side lengths of 5 cm should be prepared. Separate triangles must be folded from them.
Then fold the parts in half, reducing the size of the triangles.
For further actions, details of white and raspberry shades will be required.
White and raspberry ribbon blanks need to be folded together. This must be done by overlaying them one on top of the other, combining the edges. The crimson triangle should be located at the top, covering a white blank.
Holding together both parts, the triangles must be folded in half, covering the raspberry ribbon in the inside.
Thin corners of the created part should be carefully cut, and the resulting edge scorched to solder all layers.
It remains to smooth the depth of the parts, cutting off the excess and processing the edges of the two-color blank with fire.
It remains to expand the created petal.
The main flower of this clip will require 11 such petals. They must be created completely repeating the sequence of manufacturing a two-color petal.
Now you need a middle for the flower. It is created from rounded petals. Of the white squares, triangles must again be added.
Then, using a sewing needle and thread, it is necessary to sew together the slices of the prepared triangle. The stitch should be laid 3 mm from the edge, and the stitches should be no more than 4 mm.
The thread of the done seam needs to be tightened strongly at one point, collecting the fabric in small folds. Having done several reinforcing stitches, the thread should be cut.
Slices of the petal are obtained by curves, so they must be aligned and thoroughly scorched by fire.
Such rounded petals for the manufacture of the middle of the flower, you need to prepare 6 pieces.
Now using a glue gun, rounded parts need to be joined together, placing their bases in a circle.
Now you can collect the flower, but this will require a base. It must be cut out of a white tape in the shape of a circle with a diameter of 4.3 cm.
On the edge of the prepared base, all two-color petals must be glued.
Then the central part must be closed with the created center of the rounded petals.
The flower is almost ready, it remains to create a twig for it. It is made of individual parts with a pointed upper part, such as in the main flower, only without the addition of raspberry details.
Four such details need to be glued in a row, creating the first row of twigs for the flower.
In the next row, you need to glue three blanks, attaching them between the details of the first tier.
In the third row you need to glue two petals.
In the latter, it remains to fix one part, completing the twig.
The finished twig must be secured between the flower petals.
From the bottom of the flower, two parts of their white tape should be glued, which will completely cover the attachment points of the petals.
In the center of the flower and its branches, it remains to attach a steel clip.
The decoration now needs to be supplemented with beads of silver and raspberry shades, and the places of combining the petals should be treated with sparkles.
Monica clamp is ready!
